Simulate a cylindrical combustor burning methane CH4 in air using the finiterate chemistry model

zou_mo · January 12, 2006, 03:39

Which solver in OpenFOAM1.2 can be used to simulate this problem? I am not a expert for combustion.

Thanks all.

lucchini · January 12, 2006, 04:27

Hi Zou!
OpenFOAM has two solvers for turbulent combustion:

- XiFoam: solver for turbulent premixed combustion with the Weller model (known also as b-Xi)

- ReactingFoam: solver for turbulent combustion with the Partially Stirred Reactor Model and complex chemistry. The partially stirred reactor is a modified version of the EDC model by Magnussen.

If you want to use the finite rate chemistry model you have to implement it by yourself. Before implementing that, study in detail the two applications I previously mentioned.

Also have a look at the classes contained in

$FOAM_SRC/thermophysicalModels/combustion

$FOAM_SRC/thermophysicalModels/chemistryModel

Regards.

Tommaso

zou_mo · March 29, 2006, 02:41

Thank you.
Now I want to simulate the turbulent combustion in the SCRAMJET combustor shown below:

.
The air and fuel are injected into the field from different positions.

In OpenFOAM, which solver can be used to to this? ReactingFoam or other?

Thanks.

zou_mo · March 30, 2006, 00:50

My own CFD code failed to give nice result for the problem mentioned above. If possible, I want to solve it with OpenFOAM.

January 12, 2006, 03:39	Which solver in OpenFOAM1.2 ca	#1
zou_mo Member zoujianfeng Join Date: Mar 2009 Location: Hangzhou, China Posts: 30 Rep Power: 17	Which solver in OpenFOAM1.2 can be used to simulate this problem? I am not a expert for combustion. Thanks all.

January 12, 2006, 04:27	Hi Zou! OpenFOAM has two solv	#2
lucchini Member Tommaso Lucchini Join Date: Mar 2009 Posts: 87 Rep Power: 17	Hi Zou! OpenFOAM has two solvers for turbulent combustion: - XiFoam: solver for turbulent premixed combustion with the Weller model (known also as b-Xi) - ReactingFoam: solver for turbulent combustion with the Partially Stirred Reactor Model and complex chemistry. The partially stirred reactor is a modified version of the EDC model by Magnussen. If you want to use the finite rate chemistry model you have to implement it by yourself. Before implementing that, study in detail the two applications I previously mentioned. Also have a look at the classes contained in $FOAM_SRC/thermophysicalModels/combustion $FOAM_SRC/thermophysicalModels/chemistryModel Regards. Tommaso

March 29, 2006, 02:41	Thank you. Now I want to simu	#3
zou_mo Member zoujianfeng Join Date: Mar 2009 Location: Hangzhou, China Posts: 30 Rep Power: 17	Thank you. Now I want to simulate the turbulent combustion in the SCRAMJET combustor shown below: . The air and fuel are injected into the field from different positions. In OpenFOAM, which solver can be used to to this? ReactingFoam or other? Thanks.

March 30, 2006, 00:50	My own CFD code failed to give	#4
zou_mo Member zoujianfeng Join Date: Mar 2009 Location: Hangzhou, China Posts: 30 Rep Power: 17	My own CFD code failed to give nice result for the problem mentioned above. If possible, I want to solve it with OpenFOAM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2 Step Methane-Air Chemistry Model	Prateep Chatterjee	FLUENT	3	November 1, 2016 14:30
gas turbine combustor model - HELP!	Phil	FLUENT	7	May 2, 2007 07:40
gas turbine combustor model - HELP!	Phil	Main CFD Forum	5	April 10, 2007 12:54
gas turbine combustor model - HELP!	Phil	FLUENT	2	April 9, 2007 06:05
gas turbine combustor model - HELP!	Phil	Main CFD Forum	0	April 8, 2007 21:38