DNS Foam tutorial problem

msekandi1 · June 21, 2006, 08:05

Hi,

I'm new to foam and I have a problem running the dnsFoam tutorial and the ChannelOodles tutorial. I can construct the mesh and the tutorial will run. However, when I try to load up paraview to look at the results I get the following error message:

--> FOAM FATAL ERROR : Not implemented

From function void CyclicPointPatchField<patchfield,>::evaluate ()
in file /home/dm2/henry/OpenFOAM/OpenFOAM-1.3/src/OpenFOAM/lnInclude/CyclicPointPatchFie ld.C at line 187.

FOAM aborting

/home/msekandi/OpenFOAM/linux/paraview-2.4.2/lib/paraview-2.4/paraview-real: symbol lookup error: /hom e/msekandi/OpenFOAM/OpenFOAM-1.3/lib/linuxGcc4DPOpt/libOpenFOAM.so: undefined symbol: cplus_demangle

Any assistance would be much appreciated.

Regards,

Michael Sekandi

luca · June 21, 2006, 08:50

Hi Michael,

Simply comments from line 183-187 in the file $FOAM_SRC/OpenFOAM/lnInclude/CyclicPointPatchFie ld.C

and recompile

Luca

msekandi1 · June 21, 2006, 10:31

Hi Luca,

I tried this solution but it failed and I got the same error message again.

I'm not sure what's wrong with the code.

Michael

luca · June 21, 2006, 10:51

Hi Michael,

this is the right way. I have encountered the same problem.

See also http://www.cfd-online.com/cgi-bin/Op...=7286#POST7286

Luca

msekandi1 · June 23, 2006, 09:39

Hi,

I have tried and tried again, and still am encountering the same fatal error with ParaView for the dns and stressedfem tutorials. I think it's a path problem but I don't know what to do if it is.

Michael

hjasak · June 23, 2006, 14:27

Nope: you need to rebuild the OpenFOAM library after you have done the stuff described above:

foamsrc
wmake libso

Enjoy,

Hrv

June 21, 2006, 08:05	Hi, I'm new to foam and I h	#1
msekandi1 New Member Michael Sekandi Join Date: Mar 2009 Location: London, UK Posts: 5 Rep Power: 17	Hi, I'm new to foam and I have a problem running the dnsFoam tutorial and the ChannelOodles tutorial. I can construct the mesh and the tutorial will run. However, when I try to load up paraview to look at the results I get the following error message: --> FOAM FATAL ERROR : Not implemented From function void CyclicPointPatchField<patchfield,>::evaluate () in file /home/dm2/henry/OpenFOAM/OpenFOAM-1.3/src/OpenFOAM/lnInclude/CyclicPointPatchFie ld.C at line 187. FOAM aborting /home/msekandi/OpenFOAM/linux/paraview-2.4.2/lib/paraview-2.4/paraview-real: symbol lookup error: /hom e/msekandi/OpenFOAM/OpenFOAM-1.3/lib/linuxGcc4DPOpt/libOpenFOAM.so: undefined symbol: cplus_demangle Any assistance would be much appreciated. Regards, Michael Sekandi

June 21, 2006, 08:50	Hi Michael, Simply commen	#2
luca Member Luca M. Join Date: Mar 2009 Location: Luzern, Switzerland Posts: 59 Rep Power: 17	Hi Michael, Simply comments from line 183-187 in the file $FOAM_SRC/OpenFOAM/lnInclude/CyclicPointPatchFie ld.C and recompile Luca

June 21, 2006, 10:31	Hi Luca, I tried this solut	#3
msekandi1 New Member Michael Sekandi Join Date: Mar 2009 Location: London, UK Posts: 5 Rep Power: 17	Hi Luca, I tried this solution but it failed and I got the same error message again. I'm not sure what's wrong with the code. Michael

June 21, 2006, 10:51	Hi Michael, this is the rig	#4
luca Member Luca M. Join Date: Mar 2009 Location: Luzern, Switzerland Posts: 59 Rep Power: 17	Hi Michael, this is the right way. I have encountered the same problem. See also http://www.cfd-online.com/cgi-bin/Op...=7286#POST7286 Luca

June 23, 2006, 09:39	Hi, I have tried and tried	#5
msekandi1 New Member Michael Sekandi Join Date: Mar 2009 Location: London, UK Posts: 5 Rep Power: 17	Hi, I have tried and tried again, and still am encountering the same fatal error with ParaView for the dns and stressedfem tutorials. I think it's a path problem but I don't know what to do if it is. Michael

June 23, 2006, 14:27	Nope: you need to rebuild the	#6
hjasak Senior Member Hrvoje Jasak Join Date: Mar 2009 Location: London, England Posts: 1,907 Rep Power: 33	Nope: you need to rebuild the OpenFOAM library after you have done the stuff described above: foamsrc wmake libso Enjoy, Hrv __________________ Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sonic foam solver for a subsonic problem	chable	OpenFOAM Running, Solving & CFD	2	August 15, 2016 11:11
[Commercial meshers] Problem with Mesh conversion Gambit msh Foam	Rachid BANNARI (Bannari)	OpenFOAM Meshing & Mesh Conversion	25	September 11, 2011 08:58
[Commercial meshers] Problem converting gambit mesh to foam	quartzian	OpenFOAM Meshing & Mesh Conversion	1	September 29, 2008 19:29
Problem with foam utilities in foamx	alan_fergus	OpenFOAM Bugs	2	January 15, 2008 07:38
problem about installing FOAM	linux freshman	Main CFD Forum	6	November 4, 2004 11:59