[hyunchang]

Hi,
I'm Hyunchang and just have started to use OpenFOAM.
We are to implement two-fluid model into 2phase flow, like spray, bubble...
For that, in starting step, I'm trying to solve channel flow where bubbles which have same diameter are passing.
So for that, I'm trying to change bubblecolumn case of tutorials.
I adjusted blockMeshdict and made new meshes and also change field data in 0 directory for the initial and boundary condition of our problem.
And then run the solver, twoPhaseEulerFoam by typing
"twoPhaseEulerFoam . channel_flow" in commander.
but I Have got error message like below.




lee@pcblue:~/OpenFOAM/lee-1.4.1/run/tutorials/twoPhaseEulerFoam> twoPhaseEulerFoam . channel_flow
/*---------------------------------------------------------------------------*\
| ========= | |
| \ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \ / O peration | Version: 1.4.1 |
| \ / A nd | Web: http://www.openfoam.org |
| \/ M anipulation | |
\*---------------------------------------------------------------------------*/

Exec : twoPhaseEulerFoam . channel_flow
Date : Sep 11 2007
Time : 18:18:49
Host : pcblue
PID : 6090
Root : /nfs/home/lee/OpenFOAM/lee-1.4.1/run/tutorials/twoPhaseEulerFoam
Case : channel_flow
Nprocs : 1
Create time

Create mesh for time = 0


Reading environmentalProperties
Reading transportProperties

Calculating face flux field phia
Calculating face flux field phib
Reading field alpha

Reading field p

Reading field k

Reading field epsilon

Calculating field nutb

#0 Foam::error::printStack(Foam:stream&) in "/nfs/home/lee/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libOpenFOAM.so"
#1 Foam::sigFpe::sigFpeHandler(int) in "/nfs/home/lee/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libOpenFOAM.so"
#2 Uninterpreted: [0xb7eff420]
#3 Foam::divide(Foam::Field<double>&, Foam::UList<double> const&, Foam::UList<double> const&) in "/nfs/home/lee/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libOpenFOAM.so"
#4 void Foam::divide<foam::fvpatchfield,>(Foam::GeometricF ield<double,>&, Foam::GeometricField<double,> const&, Foam::GeometricField<double,> const&) in "/nfs/home/lee/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/twoPhaseEu lerFoam"
#5 Foam::tmp<foam::geometricfield<double,> > Foam::operator/<foam::fvpatchfield,>(Foam::tmp<foam::geometricfie ld<double,> > const&, Foam::GeometricField<double,> const&) in "/nfs/home/lee/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/twoPhaseEu lerFoam"
#6 main in "/nfs/home/lee/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/twoPhaseEu lerFoam"
#7 __libc_start_main in "/lib/libc.so.6"
#8 Foam::regIOobject::readIfModified() in "/nfs/home/lee/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/twoPhaseEu lerFoam"
Floating point exception



It will be very kind of you to tell me any advice for this.

Many thanks.

Hyunchang.