RSMEARSM MSHA

msha · October 7, 2007, 06:40

Dear All

Is there any RSM/EARSM for turbulence in FOAM

IF not, how I can apply the method in code

any suggestions,reference , tutorial,...

Thank you all

msha · October 9, 2007, 08:43

Please help

david_h · October 9, 2007, 10:33

There are several RSM turbulence models available:
http://www.opencfd.co.uk/openfoam/turbulenceModels.html

The "cavity" case in $FOAM_TUTORIALS/turbFoam can get you started. To change the turbulence model you will need to modify the "turbulenceModel" entry of "constant/turbulenceProperties".

You will also need to edit the "0/R" as described in the following:
http://www.cfd-online.com/OpenFOAM_D...tml?1191786770

Dave

msha · October 15, 2007, 12:02

THANK YOU David

I'll refer to the sites

Best regards

MSHA

msha · January 21, 2008, 01:32

ARSM turbulence mode is added to code

October 7, 2007, 06:40	Dear All Is there any RSM/E	#1
msha Member Mojtaba Shahmohammadian Join Date: Mar 2009 Posts: 73 Rep Power: 17	Dear All Is there any RSM/EARSM for turbulence in FOAM IF not, how I can apply the method in code any suggestions,reference , tutorial,... Thank you all

October 9, 2007, 08:43	Please help	#2
msha Member Mojtaba Shahmohammadian Join Date: Mar 2009 Posts: 73 Rep Power: 17	Please help

October 9, 2007, 10:33	There are several RSM turbulen	#3
david_h Member E. David Huckaby Join Date: Mar 2009 Posts: 57 Rep Power: 17	There are several RSM turbulence models available: http://www.opencfd.co.uk/openfoam/turbulenceModels.html The "cavity" case in $FOAM_TUTORIALS/turbFoam can get you started. To change the turbulence model you will need to modify the "turbulenceModel" entry of "constant/turbulenceProperties". You will also need to edit the "0/R" as described in the following: http://www.cfd-online.com/OpenFOAM_D...tml?1191786770 Dave

October 15, 2007, 12:02	THANK YOU David I'll refer	#4
msha Member Mojtaba Shahmohammadian Join Date: Mar 2009 Posts: 73 Rep Power: 17	THANK YOU David I'll refer to the sites Best regards MSHA

January 21, 2008, 01:32	ARSM turbulence mode is added	#5
msha Member Mojtaba Shahmohammadian Join Date: Mar 2009 Posts: 73 Rep Power: 17	ARSM turbulence mode is added to code

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
msha solve Eqn programming in C using FOAM	msha	OpenFOAM Running, Solving & CFD	2	January 6, 2008 08:03
msha ADD A NEW RELATION TO kepsilon MODEL	msha	OpenFOAM	0	December 30, 2007 10:30
msha solve Eqn programming in C using FOAM	msha	OpenFOAM	2	December 30, 2007 03:39
Which Solver MSHA	msha	OpenFOAM Running, Solving & CFD	2	October 15, 2007 12:04
[blockMesh] MSHA mesh error	msha	OpenFOAM Meshing & Mesh Conversion	0	September 23, 2007 01:46