|
[Sponsors] |
May 2, 2008, 11:29 |
Hi,
I remembered there were
|
#1 |
Senior Member
Pei-Ying Hsieh
Join Date: Mar 2009
Posts: 317
Rep Power: 18 |
Hi,
I remembered there were discussions about modeling air fraction as compressible fluid in interFoam-based solver. I am wondering if someone here has the chance to work on this type of solver? Pei |
|
March 15, 2013, 03:23 |
|
#2 |
New Member
Lalit
Join Date: May 2009
Posts: 7
Rep Power: 17 |
Hi,
Did you get any help on the model. I am also trying to simulate similar problem. Thanks Lalit |
|
March 15, 2013, 12:06 |
|
#3 |
Senior Member
Matthew Denno
Join Date: Feb 2010
Posts: 138
Rep Power: 16 |
I haven't looked into it yet, but v2.2.0 has a compressibleInterFoam solver:
https://github.com/OpenFOAM/OpenFOAM...sibleInterFoam Let us know how you make out with it. |
|
March 15, 2013, 18:00 |
|
#4 |
New Member
Join Date: Aug 2012
Posts: 22
Rep Power: 14 |
Hello all,
I'm new to OF, have previously been using my own LES solver. Today I started an implementation in OF using the CompressibleInterFoam. It looks like it works reasonable, I'm trying to set up a mixing case (similar to the depth charge tutorial). Struggling to specify pressure and density simultaneously which should be possible for a compressible fluid - but I'm not sure I've changed it to a perfect gas - as I'm modifying the demo. Anyway, it looks like the depthcharge tutorial is set up for an approximate air-water interface (since the density ratio is 1000:1 and the sigma for s.t is ~72e-3). Hope you can get it working and if so I'd be keen to discuss. All the best, Mike |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Volume fraction to mass fraction | Torsaki | CFX | 10 | March 10, 2018 04:41 |
Compressible interFoam | matthias_hofmann | OpenFOAM Running, Solving & CFD | 1 | May 11, 2009 16:20 |
VOF with air fraction compressible - literatures? | Pei-Ying Hsieh | Main CFD Forum | 1 | May 13, 2008 21:05 |
species mass fraction for compressible flow | saurav pathak | Main CFD Forum | 0 | February 19, 2008 01:37 |
How set volume fraction and species mass fraction | Reginaldo Cotto | FLUENT | 0 | August 31, 2006 05:58 |