Flow past a rotating cylinder

ddigrask · July 17, 2008, 14:39

Hi,
I would like to solve for the flow past a rotating cylinder. Can anyone help me out with this. Which solver should i use. I have a finite cylinder enclosed in a rectangular channel.

chris_sev · July 17, 2008, 17:53

Hi!

Have a look:

http://www.cfd-online.com/OpenFOAM_D...es/1/7505.html

it might help you.

su_junwei · July 18, 2008, 04:06

Hi

Please try using the utility of funkySetField to set the boundary field near the cylinder using V=w^r, and reset internal field. please refer
http://openfoamwiki.net/index.php/Co...funkySetFields

Junwei Su

ddigrask · July 18, 2008, 09:18

Hi Chris, Su,
Thank you very much. I will try both the options.

ngj · July 18, 2008, 12:02

Hi

As I talked a lot in the thread above, I would recommend you not to go with that procedure, but use FunkySetField instead, as what was discussed was in my pre-funky days, thus the solution was pretty heavy, whereas funkySetField is somewhat more flexible.

Enjoy the weekend,

Niels

July 17, 2008, 14:39	Hi, I would like to solve for	#1
ddigrask New Member Dnyanesh Digraskar Join Date: Mar 2009 Location: Amherst, MA, United States Posts: 10 Rep Power: 17	Hi, I would like to solve for the flow past a rotating cylinder. Can anyone help me out with this. Which solver should i use. I have a finite cylinder enclosed in a rectangular channel.

July 17, 2008, 17:53	Hi! Have a look: http://	#2
chris_sev New Member Chris Join Date: Mar 2009 Location: Europe Posts: 19 Rep Power: 17	Hi! Have a look: http://www.cfd-online.com/OpenFOAM_D...es/1/7505.html it might help you.

July 18, 2008, 04:06	Hi Please try using the uti	#3
su_junwei Senior Member su junwei Join Date: Mar 2009 Location: Xi'an China Posts: 151 Rep Power: 20	Hi Please try using the utility of funkySetField to set the boundary field near the cylinder using V=w^r, and reset internal field. please refer http://openfoamwiki.net/index.php/Co...funkySetFields Junwei Su

July 18, 2008, 09:18	Hi Chris, Su, Thank you very	#4
ddigrask New Member Dnyanesh Digraskar Join Date: Mar 2009 Location: Amherst, MA, United States Posts: 10 Rep Power: 17	Hi Chris, Su, Thank you very much. I will try both the options.

July 18, 2008, 12:02	Hi As I talked a lot in the	#5
ngj Senior Member Niels Gjoel Jacobsen Join Date: Mar 2009 Location: Copenhagen, Denmark Posts: 1,902 Rep Power: 37	Hi As I talked a lot in the thread above, I would recommend you not to go with that procedure, but use FunkySetField instead, as what was discussed was in my pre-funky days, thus the solution was pretty heavy, whereas funkySetField is somewhat more flexible. Enjoy the weekend, Niels __________________ Please note that I do not use the Friend-feature, so do not be offended, if I do not accept a request.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flow past cylinder	harry	FLUENT	0	May 29, 2006 07:18
Flow past a cylinder!!	VJ	FLUENT	0	August 31, 2004 18:02
Flow Past a Cylinder	Annie	Main CFD Forum	2	March 31, 2002 01:02
flow past 2-d cylinder	K.S.Ravichandran	Main CFD Forum	7	September 3, 2000 07:26
Flow past a 2D-Cylinder ?	Dwi Sakti	CFX	2	August 30, 2000 11:21