File bb has modification time 1e04 s in the future

christian · January 31, 2008, 11:14

I'm trying to compile the oodles solver with a few extra lines of code. It worked perfectly fine on my previous work station.

When I execute "wmake" I get the following error message for a number of files:

"File '...' has modification time 1e+04 s in the future"

What is this?

Best regards,
Christian Svensson

mplongjr · January 31, 2008, 11:22

I've seen that when my working directory is being shared over NFS from a different machine.. the clocks on the two machines are not in sync. If that's the case, you can fix it via ntp, either syncing both machines to an internet time source or at least syncing them to each other...

Hope that helps!

omid_7029 · September 9, 2008, 06:36

hi.
i have this prolem "warning: "has modification time in future + clock skew...." when i am trying to compile each on of solvers.without changing them.
please help me.
regards.
A. H.

eugene · September 9, 2008, 12:45

Don't worry about it. The clock on your workstation is just ahead of the machine used to create/edit the file. This will not affect your results in any way.

omid_7029 · September 11, 2008, 03:21

Thank you.

January 31, 2008, 11:14	I'm trying to compile the oodl	#1
christian Member Christian Lindbäck Join Date: Mar 2009 Posts: 55 Rep Power: 17	I'm trying to compile the oodles solver with a few extra lines of code. It worked perfectly fine on my previous work station. When I execute "wmake" I get the following error message for a number of files: "File '...' has modification time 1e+04 s in the future" What is this? Best regards, Christian Svensson

January 31, 2008, 11:22	I've seen that when my working	#2
mplongjr New Member Mike Long Join Date: Mar 2009 Location: Norman, OK, USA Posts: 8 Rep Power: 17	I've seen that when my working directory is being shared over NFS from a different machine.. the clocks on the two machines are not in sync. If that's the case, you can fix it via ntp, either syncing both machines to an internet time source or at least syncing them to each other... Hope that helps!

September 9, 2008, 06:36	hi. i have this prolem "warni	#3
omid_7029 New Member Amin Hosseini Join Date: Mar 2009 Posts: 2 Rep Power: 0	hi. i have this prolem "warning: "has modification time in future + clock skew...." when i am trying to compile each on of solvers.without changing them. please help me. regards. A. H.

September 9, 2008, 12:45	Don't worry about it. The cloc	#4
eugene Senior Member Eugene de Villiers Join Date: Mar 2009 Posts: 725 Rep Power: 21	Don't worry about it. The clock on your workstation is just ahead of the machine used to create/edit the file. This will not affect your results in any way.

September 11, 2008, 03:21	Thank you.	#5
omid_7029 New Member Amin Hosseini Join Date: Mar 2009 Posts: 2 Rep Power: 0	Thank you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to export every data w.r.t time to txt file	jaho	CFX	94	August 25, 2015 10:45
time varying BC text file	cfd.toy	CFX	0	April 22, 2008 11:03
file with data of temperature and time	Rogerio Fernandes Brito	CFX	4	January 10, 2008 18:44
Variable value with time - from SOLVER FILE	Tuks	CFX	4	July 11, 2005 06:49
Modification in a Time Dependent Velocity	Guillermo Solano	Phoenics	4	April 8, 2002 04:34