Problems about solvers

fw407 · December 22, 2007, 17:09

hi,i am a beginner of openFoam.i downloaded a FSI case and its solver, but i don't know how to creat a class on my own,how to use the solver.could anyone help me?

thanks for help in advance

jaswi · December 23, 2007, 08:59

Hi Wang

Wish you a good day.

Please be more specific and post the screen output and errors from your attempts as for now it is not clear what actually the problem is.

please tell me what you tried and where things went wrong.

Also please consult user guide if you haven't done that yet.

Kind Regards
Jaswinder

fw407 · December 23, 2007, 09:30

hi Jaswinder, thanks for your response.
i am trying to use a solver of FSI.but i do not know how to do it,so i first follow steps i found on a website to create a solver by modify a pre-defined solver,here is the address:
http://www.csc.fi/english/research/s...enfoam/modsol/

at the beginning,everything is fine,
but when i inuput "emacs Make/files"
and the terminal tells me:
The program 'emacs' can be found in the following packages:
* emacs21-nox
* emacs22-gtk
* emacs22
* emacs-snapshot
* e3
* emacs-snapshot-nox
* emacs21
* emacs22-nox
* jove
* emacs-snapshot-gtk
Try: sudo apt-get install <selected>
bash: emacs: command not found

i do not what is the problem,so i creat a file manully which the coresponding step on the website want me to creat
after that i input "wmake",problems also comes up
,the terminal tells me:
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:111: error: '::fopen' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:112: error: '::fprintf' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:113: error: '::fputc' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:114: error: '::fputs' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:115: error: '::fread' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:116: error: '::freopen' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:117: error: '::fscanf' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:118: error: '::fseek' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:119: error: '::fsetpos' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:120: error: '::ftell' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:121: error: '::fwrite' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:122: error: '::getc' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:123: error: '::getchar' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:124: error: '::gets' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:125: error: '::perror' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:126: error: '::printf' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:127: error: '::putc' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:128: error: '::putchar' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:129: error: '::puts' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:130: error: '::remove' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:131: error: '::rename' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:132: error: '::rewind' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:133: error: '::scanf' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:134: error: '::setbuf' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:135: error: '::setvbuf' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:136: error: '::sprintf' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:137: error: '::sscanf' has not been declared
/home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-g

these are just part of the errors ,for it is too long.sorry about that

So could you give me some advice on how to deal with it?

kindly regards

Feng

fw407 · December 23, 2007, 11:37

hi ,i try it ,but it seems i can not creat an executable in the
/home/fw407/OpenFOAM/fw407-1.4.1/applications/bin/linuxGccDPOpt directory

could anyone help me?

stephan · December 23, 2007, 16:43

hi,

most of the upper error lines look like your compiler believes that used commands like scanf,printf do not belong to the namespace you said.
so the question is
??what-lib??::thisbelongsto
i hope that helps...
br
stephan

fw407 · December 23, 2007, 17:50

hi, Stephan, thanks for response
i still can not figure it out .actually all i want is just to use a new solver i download on the website.i find some tips in the user's guide, but it does not tell me how to creat my own solver and how to use it specifically. i am just a beginner,so could you teach me how to do it. maybe you method is better^-^

kind regards

feng

jaswi · December 24, 2007, 03:24

Hi Wang

please send me the solver u r tying to compile. I will give it a try on my system and see whether it works.

kind regards
Jaswinder

stephan · December 24, 2007, 06:15

hi,

send me the link of the solvers and i will try to help...
br
stephan

fw407 · December 24, 2007, 11:15

hi,

tha fact is that i have compiled the predefined solver,say icoFoam, i end up with the same errors, but i can run FoamX, and follow the cases in the user's guid without any bugs. so i think the solver is good .maybe the way i compile the solver is not correct, maybe something is wrong with my installation,and i fail to install some important files .so i am a little bit lost

i will send you the solver by eamil

many thanks ^_^

feng

21kalee · January 1, 2008, 20:13

Hi, feng wang.
I will also give a try. Send me the link.....

asaha · January 2, 2008, 07:52

Hello Feng,

I would appreciation if your can send me the links for the solver and tutotial file for FSI.

fw407 · January 2, 2008, 14:19

hi a a saha

this is the link of the sovler and it also involves two particular case for the sovler.

Kind regards

feng

asaha · January 3, 2008, 05:27

Helllo Feng,

The link is not available in your post. Can you pl. repost the link again.

Thanks,

a a saha

fw407 · January 3, 2008, 05:56

hi,sorry about that

http://openfoamwiki.net/index.php/Contrib_icoStructFoam

all the best

feng

gschaider · January 3, 2008, 06:34

Hi Feng!

Which Version of OF are you using? I guess 1.4.x

The sources on that page currently only work with 1.3 and definitly won't compile on 1.4

Bernhard

fw407 · January 3, 2008, 07:22

Hi Bernhard!

i am using 1.4.1. actually i want to install 1.3, but i can only download 1.4.1 from the wenbiste of OF.

all the best

Feng

gschaider · January 3, 2008, 09:24

1.3 is available at http://sourceforge.net/projects/foam

eduardasilva · March 5, 2009, 08:29

Hello,

I am trying to compile a modified simpleFoam solver. But when I tried to run wmake an error comes out stating that:
"/usr/bin/ld: cannot find -llduSolvers
collect2: ld returned 1 exit status
make: *** [/home/USR/OpenFOAM/USR-1.5/applications/bin/linuxGccDPOpt/simpleConvergenceFoam ] Error 1"

The Make/options file is exactly the same as in OpenFoam.

I would appreciate if you could give me some advice.

Eduarda

December 22, 2007, 17:09	hi,i am a beginner of openFoam	#1
fw407 Member feng wang Join Date: Mar 2009 Posts: 67 Rep Power: 17	hi,i am a beginner of openFoam.i downloaded a FSI case and its solver, but i don't know how to creat a class on my own,how to use the solver.could anyone help me? thanks for help in advance

December 23, 2007, 08:59	Hi Wang Wish you a good day	#2
jaswi Senior Member Join Date: Mar 2009 Posts: 248 Rep Power: 18	Hi Wang Wish you a good day. Please be more specific and post the screen output and errors from your attempts as for now it is not clear what actually the problem is. please tell me what you tried and where things went wrong. Also please consult user guide if you haven't done that yet. Kind Regards Jaswinder

December 23, 2007, 09:30	hi Jaswinder, thanks for your	#3
fw407 Member feng wang Join Date: Mar 2009 Posts: 67 Rep Power: 17	hi Jaswinder, thanks for your response. i am trying to use a solver of FSI.but i do not know how to do it,so i first follow steps i found on a website to create a solver by modify a pre-defined solver,here is the address: http://www.csc.fi/english/research/s...enfoam/modsol/ at the beginning,everything is fine, but when i inuput "emacs Make/files" and the terminal tells me: The program 'emacs' can be found in the following packages: * emacs21-nox * emacs22-gtk * emacs22 * emacs-snapshot * e3 * emacs-snapshot-nox * emacs21 * emacs22-nox * jove * emacs-snapshot-gtk Try: sudo apt-get install <selected> bash: emacs: command not found i do not what is the problem,so i creat a file manully which the coresponding step on the website want me to creat after that i input "wmake",problems also comes up ,the terminal tells me: /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:111: error: '::fopen' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:112: error: '::fprintf' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:113: error: '::fputc' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:114: error: '::fputs' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:115: error: '::fread' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:116: error: '::freopen' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:117: error: '::fscanf' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:118: error: '::fseek' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:119: error: '::fsetpos' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:120: error: '::ftell' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:121: error: '::fwrite' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:122: error: '::getc' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:123: error: '::getchar' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:124: error: '::gets' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:125: error: '::perror' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:126: error: '::printf' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:127: error: '::putc' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:128: error: '::putchar' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:129: error: '::puts' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:130: error: '::remove' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:131: error: '::rename' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:132: error: '::rewind' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:133: error: '::scanf' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:134: error: '::setbuf' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:135: error: '::setvbuf' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:136: error: '::sprintf' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-gnu/4.2.1/../. ./../../include/c++/4.2.1/cstdio:137: error: '::sscanf' has not been declared /home/fw407/OpenFOAM/linux/gcc-4.2.1/bin/../lib/gcc/i686-pc-linux-g these are just part of the errors ,for it is too long.sorry about that So could you give me some advice on how to deal with it? kindly regards Feng

December 23, 2007, 11:37	hi ,i try it ,but it seems i c	#4
fw407 Member feng wang Join Date: Mar 2009 Posts: 67 Rep Power: 17	hi ,i try it ,but it seems i can not creat an executable in the /home/fw407/OpenFOAM/fw407-1.4.1/applications/bin/linuxGccDPOpt directory could anyone help me?

December 23, 2007, 16:43	hi, most of the upper error	#5
stephan Senior Member Stephan Gerber Join Date: Mar 2009 Location: Germany Posts: 118 Rep Power: 17	hi, most of the upper error lines look like your compiler believes that used commands like scanf,printf do not belong to the namespace you said. so the question is ??what-lib??::thisbelongsto i hope that helps... br stephan

December 23, 2007, 17:50	hi, Stephan, thanks for respon	#6
fw407 Member feng wang Join Date: Mar 2009 Posts: 67 Rep Power: 17	hi, Stephan, thanks for response i still can not figure it out .actually all i want is just to use a new solver i download on the website.i find some tips in the user's guide, but it does not tell me how to creat my own solver and how to use it specifically. i am just a beginner,so could you teach me how to do it. maybe you method is better^-^ kind regards feng

December 24, 2007, 03:24	Hi Wang please send me the	#7
jaswi Senior Member Join Date: Mar 2009 Posts: 248 Rep Power: 18	Hi Wang please send me the solver u r tying to compile. I will give it a try on my system and see whether it works. kind regards Jaswinder

December 24, 2007, 06:15	hi, send me the link of the	#8
stephan Senior Member Stephan Gerber Join Date: Mar 2009 Location: Germany Posts: 118 Rep Power: 17	hi, send me the link of the solvers and i will try to help... br stephan

December 24, 2007, 11:15	hi, tha fact is that i have	#9
fw407 Member feng wang Join Date: Mar 2009 Posts: 67 Rep Power: 17	hi, tha fact is that i have compiled the predefined solver,say icoFoam, i end up with the same errors, but i can run FoamX, and follow the cases in the user's guid without any bugs. so i think the solver is good .maybe the way i compile the solver is not correct, maybe something is wrong with my installation,and i fail to install some important files .so i am a little bit lost i will send you the solver by eamil many thanks ^_^ feng

January 1, 2008, 20:13	Hi, feng wang. I	#10
21kalee New Member kalaiselvan Join Date: Mar 2009 Location: Mumbai, Maharashtra, India Posts: 25 Rep Power: 17	Hi, feng wang. I will also give a try. Send me the link.....

January 2, 2008, 07:52	Hello Feng, I would appreci	#11
asaha Member vof_user Join Date: Mar 2009 Posts: 67 Rep Power: 17	Hello Feng, I would appreciation if your can send me the links for the solver and tutotial file for FSI.

January 2, 2008, 14:19	hi a a saha this is the lin	#12
fw407 Member feng wang Join Date: Mar 2009 Posts: 67 Rep Power: 17	hi a a saha this is the link of the sovler and it also involves two particular case for the sovler. Kind regards feng

January 3, 2008, 05:27	Helllo Feng, The link is no	#13
asaha Member vof_user Join Date: Mar 2009 Posts: 67 Rep Power: 17	Helllo Feng, The link is not available in your post. Can you pl. repost the link again. Thanks, a a saha

January 3, 2008, 05:56	hi,sorry about that http://	#14
fw407 Member feng wang Join Date: Mar 2009 Posts: 67 Rep Power: 17	hi,sorry about that http://openfoamwiki.net/index.php/Contrib_icoStructFoam all the best feng

January 3, 2008, 06:34	Hi Feng! Which Version of O	#15
gschaider Assistant Moderator Bernhard Gschaider Join Date: Mar 2009 Posts: 4,225 Rep Power: 51	Hi Feng! Which Version of OF are you using? I guess 1.4.x The sources on that page currently only work with 1.3 and definitly won't compile on 1.4 Bernhard __________________ Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problems in compiling solvers when using OpenFOAM13_11092006	jin_xu	OpenFOAM Installation	6	July 2, 2010 13:34
What are the solvers doing	sega	OpenFOAM Running, Solving & CFD	4	April 19, 2008 17:07
fem solvers	dontknow	Main CFD Forum	2	June 24, 2007 13:51
Solvers	DB	Siemens	3	December 6, 2005 09:26
cfx solvers -FVM?	derrek	CFX	5	February 10, 2003 12:50

January 3, 2008, 07:22	Hi Bernhard! i am using 1.4	#16
fw407 Member feng wang Join Date: Mar 2009 Posts: 67 Rep Power: 17	Hi Bernhard! i am using 1.4.1. actually i want to install 1.3, but i can only download 1.4.1 from the wenbiste of OF. all the best Feng

January 3, 2008, 09:24	1.3 is available at http://sou	#17
gschaider Assistant Moderator Bernhard Gschaider Join Date: Mar 2009 Posts: 4,225 Rep Power: 51	1.3 is available at http://sourceforge.net/projects/foam __________________ Note: I don't use "Friend"-feature on this forum out of principle. Ah. And by the way: I'm not on Facebook either. So don't be offended if I don't accept your invitation/friend request

March 5, 2009, 08:29	Hello, I am trying to compi	#18
eduardasilva New Member Ana Eduarda Sa Silva Join Date: Mar 2009 Posts: 13 Rep Power: 17	Hello, I am trying to compile a modified simpleFoam solver. But when I tried to run wmake an error comes out stating that: "/usr/bin/ld: cannot find -llduSolvers collect2: ld returned 1 exit status make: *** [/home/USR/OpenFOAM/USR-1.5/applications/bin/linuxGccDPOpt/simpleConvergenceFoam ] Error 1" The Make/options file is exactly the same as in OpenFoam. I would appreciate if you could give me some advice. Eduarda