 |
 |
 |
|
|
|
[Sponsors] | ||||
February 7, 2024, 08:08
|
Flame extinguished after ignition (FPV)
|
#1 |
|
New Member
Hafiz Ahmad
Join Date: May 2019
Location: Brunei
Posts: 19
Rep Power: 7  |
I am currently using a flamelet/progress variable (FPV) solver based on reactingFoam to solve non-premixed turbulent flames. Previously, I was able to ignite and sustain a jet flame by introducing progress variable, C, into the simulation from the pilot flame surrounding the main jet nozzle. This was quite straightforward since the pilot flames were always burning.
Right now, I am simulating another jet flame with no pilot flames. I tried to ignite the fuel by setting an ignition region by using C to ignite the flame at the first initial 0.01s of the simulation. I could see that the fuel was ignited but it was extinguished as soon as the ignition was off. Has anybody get this error before? 
|
|
|
|
|
|
March 30, 2024, 18:13
|
|
#2 |
|
New Member
Bk
Join Date: Feb 2024
Posts: 2
Rep Power: 0 |
Hello,
I am sorry, I do not have any answer for your query. However, I am gonna implement FPVFoam in my project. So, if you do not mind I have few queries related to solver compiling. Best Regards, |
|
|
|
|
|
 |
| Tags |
| flamelet model, turbulent flame |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Ignition and flame propagation with XiFoam for a few meters long comput. domains | Gloq | OpenFOAM Running, Solving & CFD | 1 | February 21, 2023 13:22 |
| Simulation of the Sydney Bluff Body Flame ignition | Hogi | Main CFD Forum | 0 | December 9, 2015 10:28 |
| Premixed flame ignition energy | Londo | Main CFD Forum | 0 | July 13, 2015 11:57 |
| how to use setFields for flame ignition?? | Dan1788 | OpenFOAM Running, Solving & CFD | 5 | September 25, 2014 21:26 |
| How to model a heat source for ignition of flame | harshad88 | FLUENT | 3 | November 21, 2013 02:18 |
Linear Mode
