Dynamic Mesh moving the whole mesh with the body

MFS · October 3, 2023, 11:43

Hi Foamers,

I was wondering if OpenFOAM has any dynamic solver in which you can move the whole domain with a rigid body. I want to move the whole domain in order to avoid too big mesh deformations which could make diverge the simulation.

I know that feature is available in Starccm+ but after studying rigidBodyMotion and sixDoFRigidBodyMotion I couldn't find anything similar.

Any help is appreciated.

Kind regards,

Manu

2538sukham · October 4, 2023, 11:57

SixDoFRigidBodyMotion might be the one you are looking for. Have you tried sloshing tutorials?

MFS · October 4, 2023, 13:25

Hi Michael,

First of all, thank you for your quick answer.

As far as I know, in these sloshing tutorials you have a prescribed motion of the mesh. In my case I cannot define the trim of the boat (rotation around Y axis) and heave (translation in the Z axis). These are two variables that I get to know once the simulation is converged.

Please, correct me if I am wrong.

Kind regards,

Manu

JNSN · October 5, 2023, 05:15

Hi Manu,

you are right, for rigidBodyDynamics and sixDoFRigidBodyMotions you can not move the entire mesh (weather for all nor selected DoF's), which would be a nice and helpfull feature for some applications.

You can try to misuse the SLERP interpolation and change the innerDistance to some value greater than your domain dimension. Not sure if this works, but should be easily done.

Best,
Jan

October 3, 2023, 11:43	Dynamic Mesh moving the whole mesh with the body	#1
MFS New Member Manuel Fraga Seoane Join Date: Jan 2020 Posts: 9 Rep Power: 6	Hi Foamers, I was wondering if OpenFOAM has any dynamic solver in which you can move the whole domain with a rigid body. I want to move the whole domain in order to avoid too big mesh deformations which could make diverge the simulation. I know that feature is available in Starccm+ but after studying rigidBodyMotion and sixDoFRigidBodyMotion I couldn't find anything similar. Any help is appreciated. Kind regards, Manu

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynamic mesh setup, VOF 2 Phase, moving zones, possible? (diagram / picture)	silent2608	Fluent Multiphase	2	August 17, 2024 04:17
Two Distinct Dynamic Mesh Zones Representing One Body	Shrap	Main CFD Forum	1	December 7, 2021 10:09
6DOF Dynamic mesh for a floating rigid body in fluent v20	Tushar Patel	Fluent Multiphase	0	September 22, 2021 07:02
Dynamic Mesh For a Simulating a moving ship in water (VOF)	hshafaei	Fluent UDF and Scheme Programming	0	August 22, 2011 11:33
Convergence moving mesh	lr103476	OpenFOAM Running, Solving & CFD	30	November 19, 2007 15:09

October 4, 2023, 11:57		#2
2538sukham Member Michael Sukham Join Date: Mar 2020 Location: India Posts: 84 Rep Power: 6	SixDoFRigidBodyMotion might be the one you are looking for. Have you tried sloshing tutorials?

October 4, 2023, 13:25		#3
MFS New Member Manuel Fraga Seoane Join Date: Jan 2020 Posts: 9 Rep Power: 6	Hi Michael, First of all, thank you for your quick answer. As far as I know, in these sloshing tutorials you have a prescribed motion of the mesh. In my case I cannot define the trim of the boat (rotation around Y axis) and heave (translation in the Z axis). These are two variables that I get to know once the simulation is converged. Please, correct me if I am wrong. Kind regards, Manu

October 5, 2023, 05:15		#4
JNSN Senior Member Jan Join Date: Jul 2009 Location: Hamburg Posts: 143 Rep Power: 20	Hi Manu, you are right, for rigidBodyDynamics and sixDoFRigidBodyMotions you can not move the entire mesh (weather for all nor selected DoF's), which would be a nice and helpfull feature for some applications. You can try to misuse the SLERP interpolation and change the innerDistance to some value greater than your domain dimension. Not sure if this works, but should be easily done. Best, Jan