Changing position using setFields

SaltyEnforcer · March 4, 2023, 16:53

https://ibb.co/6g54WYJI am simulating with two fluids. In the parallel channel, I want to change the position of the fluid till the vertical channel which is (0.0018 0.0006 0.0006) but even after setting this in setFieldsDict I am getting varied results, the initial image from paraview is attached.

How do I increase the thickness till the vertical column using setFields?

piu58 · March 5, 2023, 02:23

I don't know if you can "change" the position. At least is is not a good way.

I recommend starting with internalField uniform 0; in the alpha file and use setFields to do all the rest.

March 4, 2023, 16:53	Changing position using setFields	#1
SaltyEnforcer New Member SaltyEnforcer Join Date: Mar 2023 Posts: 3 Rep Power: 3	https://ibb.co/6g54WYJI am simulating with two fluids. In the parallel channel, I want to change the position of the fluid till the vertical channel which is (0.0018 0.0006 0.0006) but even after setting this in setFieldsDict I am getting varied results, the initial image from paraview is attached. How do I increase the thickness till the vertical column using setFields?

March 5, 2023, 02:23		#2
piu58 Senior Member Uwe Pilz Join Date: Feb 2017 Location: Leipzig, Germany Posts: 744 Rep Power: 15	I don't know if you can "change" the position. At least is is not a good way. I recommend starting with internalField uniform 0; in the alpha file and use setFields to do all the rest. __________________ Uwe Pilz -- Die der Hauptbewegung überlagerte Schwankungsbewegung ist in ihren Einzelheiten so hoffnungslos kompliziert, daß ihre theoretische Berechnung aussichtslos erscheint. (Hermann Schlichting, 1950)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[PyFoam] Problems with the new PyFoam release	zfaraday	OpenFOAM Community Contributions	13	December 9, 2014 19:58
[PyFoam] having problems with pyfoam Installation	vitorspadetoventurin	OpenFOAM Community Contributions	3	December 2, 2014 08:18
Force dependent on particle position	jranita	OpenFOAM Programming & Development	1	August 23, 2011 20:44
changing position of Water column in dam break	vivek070176	OpenFOAM	2	June 29, 2011 07:55
how to read in a position file	jiejie	OpenFOAM	0	May 23, 2011 05:38