Thermal Conductivity in reactingFoam

pspk · April 28, 2022, 02:26

I am using reactingFoam solver with Sutherland Transport. I'm aware that Sutherland also calculates thermal conductivity k, from viscosity and specific heats. Can anyone tell me how to extract that thermal conductivity as a result in the simulation along with other properties like T and U?

dlahaye · April 28, 2022, 13:44

https://www.cfd-online.com/Wiki/Sutherland%27s_law

To visualize, post-processing in e.g. Paraview can be employed.

dkaddar · May 2, 2022, 19:32

I understand your problem to be that you are having difficulty writing the thermal conductivity field as a result at all since your solver probably is not writing it per default.

If that is the case, have a look at the writeObjects functionObject. There you should be able to specify the alpha field or any field present in the object registry for that matter.

April 28, 2022, 02:26	Thermal Conductivity in reactingFoam	#1
pspk New Member Sai Phani Keerthan Ponduri Join Date: Dec 2021 Posts: 3 Rep Power: 5	I am using reactingFoam solver with Sutherland Transport. I'm aware that Sutherland also calculates thermal conductivity k, from viscosity and specific heats. Can anyone tell me how to extract that thermal conductivity as a result in the simulation along with other properties like T and U?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
effective thermal conductivity and mass weighted thermal conductivity	Weiqiang Liu	FLUENT	8	June 19, 2020 01:08
calculation of thermal conductivity in reactingFoam	sto16	OpenFOAM Running, Solving & CFD	11	April 25, 2017 00:46
Question about anisotropic thermal conductivity	Szweyk	STAR-CCM+	2	June 30, 2016 09:26
Thermal conductivity issue	Jared1986	CFX	3	March 20, 2014 11:38
IAPWS water properties + orthotropic thermal conductivity	Chander	CFX	1	February 29, 2012 18:26

April 28, 2022, 13:44		#2
dlahaye Senior Member Domenico Lahaye Join Date: Dec 2013 Posts: 802 Blog Entries: 1 Rep Power: 18	https://www.cfd-online.com/Wiki/Sutherland%27s_law To visualize, post-processing in e.g. Paraview can be employed.

May 2, 2022, 19:32		#3
dkaddar New Member Join Date: Dec 2021 Location: Darmstadt Posts: 6 Rep Power: 5	I understand your problem to be that you are having difficulty writing the thermal conductivity field as a result at all since your solver probably is not writing it per default. If that is the case, have a look at the writeObjects functionObject. There you should be able to specify the alpha field or any field present in the object registry for that matter.