|
[Sponsors] |
Using scalarTransportFoam for compressible flow |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
Join Date: Sep 2020
Posts: 2
Rep Power: 0 ![]() |
Hi,
I want to find the concentration distribution of a specie using scalarTransportFoam for a compressible flow case where I already have the flow field solved for Pressure, velocity and Temperature using rhoCentralFoam. The issue here is that the Diffusivity of the specie depends on Temperature and thus Temperature field has to be included while solving with scalarTransportFoam. But I am unable to find any case where anybody has included Temperature along with Pressure and Velocity field while solving for Concentration using scalarTransportFoam. Do I need to make changes in scalarTransportFoam to do this or such functionality is available in OpenFOAM? |
|
![]() |
![]() |
![]() |
![]() |
#3 |
New Member
Join Date: Sep 2020
Posts: 2
Rep Power: 0 ![]() |
||
![]() |
![]() |
![]() |
![]() |
#4 |
Senior Member
|
Apologies.
Look for the report "Modifying buoyantPimpleFoam for the Simulation of Solid-Liquid Phase Change with Temperature-dependent Thermophysical Properties" by Daniel Hummel at http://www.tfd.chalmers.se/~hani/kur...CFD/#YEAR_2017 |
|
![]() |
![]() |
![]() |
Tags |
compressible flow, scalartransportfoam |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
Different flow patterns in CFX and Fluent | avi@lpsc | FLUENT | 4 | April 8, 2012 06:12 |
Flow meter Design | CD adapco Group Marketing | Siemens | 3 | June 21, 2011 08:33 |
potential flow vs. Euler flow | curious ... | Main CFD Forum | 23 | July 21, 2006 07:40 |
Plug Flow | Franck | Main CFD Forum | 3 | September 4, 2003 05:57 |