[Davyd]

Please, could someone help me to overcome this problem to run the simulation. When I start simulation (reactingTwoPhaseEulerFoam) the following problem occurs:

/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: v1912 |
| \\ / A nd | Website: www.openfoam.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : _f3950763fe-20191219 OPENFOAM=1912
Arch : "LSB;label=32;scalar=64"
Exec : reactingTwoPhaseEulerFoam
Date : Dec 20 2020
Time : 15:03:27
Host : LAPTOP-LTH2ON9V
PID : 636
I/O : uncollated
Case : /mnt/c/Users/David/Downloads/OpenFOAM/OpenFOAM-v1912/RUN/fluidisedBed_REACTING_bcolumn
nProcs : 1
trapFpe: Floating point exception trapping enabled (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0


PIMPLE: no residual control data found. Calculations will employ 3 corrector loops


Reading g

Reading hRef
Creating phaseSystem

Selecting twoPhaseSystem interfaceCompositionPhaseChangeTwoPhaseSystem
Selecting phaseModel for air: reactingPhaseModel
Selecting diameterModel for phase air: isothermal
Selecting thermodynamics package
{
type heRhoThermo;
mixture reactingMixture;
transport sutherland;
thermo janaf;
equationOfState perfectGas;
specie specie;
energy sensibleInternalEnergy;
}

Selecting chemistryReader foamChemistryReader
davyd@LAPTOP-LTH2ON9V:/mnt/c/Users/David/Downloads/OpenFOAM/OpenFOAM-v1912/RUN/fluidisedBed_REACTING_bcolumn$

Please provide any advice how this problem can be solved.
Thank you in advance.

[petros]

Originally Posted by Davyd

PIMPLE: no residual control data found. Calculations will employ 3 corrector loops

I don't think this is a fatal error. But I can't say much since you have provided no information about your case set-up. Please use your post's title to search for older posts in the forum. There is plenty of discussion regarding what might have gone wrong.

Best,
Petros