Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Running Porous Medium using porousSimpleFoam

Updated Threads

Reply

Search this Thread

November 18, 2020, 01:23	Running Porous Medium using porousSimpleFoam	#1
ankipbh New Member Ankita Join Date: Nov 2020 Posts: 1 Rep Power: 0	I am trying to run a simple case of flow through a porous medium. The part after the diverging portion consists of the porous medium. Using a turbulent model. However when i apply volumetric inlet or a constant inlet velocity, the profiles are not as it should be. I am attaching the velocity profile of the output as well as the U file. I am unable to figure out what my mistake is. Any suggestions would be helpful Thanks in Advance pressure.JPG velocity.JPG U.JPG

Reply

Tags

porosity model, porous cell zone, porous medium, poroussimplefoam

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbulent flow in porous medium	Chander	CFX	4	January 17, 2017 10:50
Flow through porous medium using CFX: lack of convergence	Chander	CFX	3	July 23, 2014 07:32
mass transfer and occupying porous medium	borhan_sd@yahoo.com	FLUENT	0	June 26, 2013 04:34
Porous Medium Question	hamzamotiwala	STAR-CCM+	1	April 20, 2012 03:55
porous medium and reactions	Valeria	FLUENT	1	July 10, 2009 04:58

All times are GMT -4. The time now is 15:59.