 |
 |
 |
|
|
|
[Sponsors] | ||||
April 20, 2020, 23:51
|
[interFoam] porousBafflePressure BC
|
#1 |
|
New Member
Join Date: Feb 2016
Posts: 3
Rep Power: 10  |
Hi,
I am trying to solve a problem which includes flow passes through a porous baffle (geotextile). I used createBaffleDict to create the baffle. So; It could create a cone shaped porous part. The problem is; the porous jump does not work. I tried every possible combination for the D and I coefficient. I also tried the baffle as a wall and it worked. But, nothing is changing when I make it porous. If I use small coefficients nothing happens, water just flows as it does not exist. If I use large coefficients; the model just breaks. What would be the possible problem? Thank you for your help. |
|
|
|
|
 |
| Tags |
| boundary condition, darcy-forchheimer, interfoam, porous baffle |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Applying Wall Functions and/or No-Slip to a porousBafflePressure BC | Neil Adams | OpenFOAM Running, Solving & CFD | 0 | December 14, 2018 07:40 |
| Error using porousBafflePressure BC with twoPhaseEulerFoam | mbuergle | OpenFOAM Running, Solving & CFD | 3 | August 14, 2018 10:25 |
| Oscillating a porousBafflePressure (cyclic) boundary | mhasif02 | OpenFOAM | 0 | April 10, 2018 07:45 |
| potentialFoam porousBafflePressure turbulence | GRAUPS | OpenFOAM Programming & Development | 3 | January 23, 2014 15:11 |
| porousBafflepressure BC | laurent257 | OpenFOAM | 1 | August 24, 2012 17:49 |
Linear Mode
