[tanmay singhal]

```
bash-4.2$  ./Allclean
Cleaning case /home/tanmay/hyStrath/run/hyStrath/hy2Foam/bluntedCone
bash-4.2$  ./Allrun 
Running gmshToFoam on /home/tanmay/hyStrath/run/hyStrath/hy2Foam/bluntedCone
Running checkMesh on /home/tanmay/hyStrath/run/hyStrath/hy2Foam/bluntedCone
Running hy2Foam on /home/tanmay/hyStrath/run/hyStrath/hy2Foam/bluntedCone
./Allrun: line 13: hy2Foam: command not found
Running postProcess on /home/tanmay/hyStrath/run/hyStrath/hy2Foam/bluntedCone
```

I was working on hy2foam tutorial problem and encountered the issue mentioned above.
gsmshToFoam and checkMesh are working fine but it is unable to find hy2Foam.

I am new to ubuntu and unable to resolve the issue. Kindly help to get this through.

[tas38]

It appears that your version of OpenFOAM is working. Or at least the gmsh... and checkMesh utilities.

Was hyStrath successfully installed? I suspect not.

I would check the following...
1. Was the hyStrath Github repository cloned to the correct directory per the install instructions (https://github.com/vincentcasseau/hy...ion-and-Sync)?
2. What (if any) errors were thrown during the install process? The should be visible within the file "logInstall" after running ./install-all.sh 8 > logInstall 2>&1 &

[tanmay singhal]

Originally Posted by tas38

It appears that your version of OpenFOAM is working. Or at least the gmsh... and checkMesh utilities.

Was hyStrath successfully installed? I suspect not.

I would check the following...
1. Was the hyStrath Github repository cloned to the correct directory per the install instructions (https://github.com/vincentcasseau/hy...ion-and-Sync)?
2. What (if any) errors were thrown during the install process? The should be visible within the file "logInstall" after running ./install-all.sh 8 > logInstall 2>&1 &

The first step ask us to go for this command "
git clone https://github.com/vincentcasseau/hyStrath.git --branch master --single-branch && cd hyStrath/"

but the cloning speed was 10 kb/ps. So i downloaded it as ZIP file and extracted it and pasted in home folder as hyStarth.

Then i invoked "./startOpenFOAM" and changed the working directory to hyStrath and invoked "./install-all.sh 8 > logInstall 2>&1 &" but it showed [2] 6731 and nothing happened. Then i invoked "./install-all.sh" and it compiled the source codes of hystrath. And the loginstall file is nill.

PS : i have used docker for installation of openfoam and hy2foam link has asked to install openfoam through source code. & log.hy2foam shows "/opt/OpenFOAM/OpenFOAM-v1912/bin/tools/RunFunctions: line 228: hy2Foam: command not found"