|
[Sponsors] |
Info on turbulentDigitalFilterInlet and turbulentDFSEMInlet BCs for LES simulation |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 26, 2020, 12:50 |
Info on turbulentDigitalFilterInlet and turbulentDFSEMInlet BCs for LES simulation
|
#1 |
New Member
Join Date: Feb 2020
Posts: 12
Rep Power: 6 |
Dear FOAMers,
I'm running a simple case (boundary layer development on a flat plate) trying to use a LES approach. I have detailed experimental data for the inlet condition and I'd like to test the following 3 BC options: - turbulentDFSEMInlet - turbulentDigitalFilterInlet variant=digitalFilter - turbulentDigitalFilterInlet variant=reducedDigitalFilter The problem is that, especially for the last two options, there is really few documentation and I'd like to know if some of you has some details about these conditions and how to properly use them. Thanks in advance!!! |
|
February 26, 2020, 18:04 |
|
#2 |
Senior Member
Herpes Free Engineer
Join Date: Sep 2019
Location: The Home Under The Ground with the Lost Boys
Posts: 931
Rep Power: 13 |
The publications were mentioned in the header files of the BCs I think. Have a look at their .H files, and OpenFOAM Extended Code Guide.
__________________
The OpenFOAM community is the biggest contributor to OpenFOAM: User guide/Wiki-1/Wiki-2/Code guide/Code Wiki/Journal Nilsson/Guerrero/Holzinger/Holzmann/Nagy/Santos/Nozaki/Jasak/Primer Governance Bugs/Features: OpenFOAM (ESI-OpenCFD-Trademark) Bugs/Features: FOAM-Extend (Wikki-FSB) Bugs: OpenFOAM.org How to create a MWE New: Forkable OpenFOAM mirror |
|
|
|