[SMallin]

Hello All!
I'm new to OpenFoam but have done a few tutorials and now I'm trying to run my own case for the first time using sonicFoam.
My file is a rocket motor and I copied the files from the tutorial "prism" to run the turbulence portion.
I created the snappyHexMesh and when I check the mesh, everything appears to be okay.
I set up the initial conditions, boundaries, but when I finally try to run the solver, I get this:

/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: v1912 |
| \\ / A nd | Website: www.openfoam.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : _f3950763fe-20191219 OPENFOAM=1912
Arch : "LSB;label=32;scalar=64"
Exec : sonicFoam
Date : Feb 21 2020
Time : 13:31:43
Host : DESKTOP-8TAOB7J
PID : 1593
I/O : uncollated
Case : /home/hybrid/Downloads/motorCfdTest3/case
nProcs : 1
trapFpe: Floating point exception trapping enabled (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0


PIMPLE: no residual control data found. Calculations will employ 100 corrector loops

Reading thermophysical properties

Selecting thermodynamics package
{
type hePsiThermo;
mixture pureMixture;
transport const;
thermo hConst;
equationOfState perfectGas;
specie specie;
energy sensibleInternalEnergy;
}

nothing else appears and it looks as if the file is completed but if I open the file in Paraview, the first and last step appear the same.
Not sure if its the fvSolution file that's wrong or what but I appreciate all the help!
Thank you in advance for all your time!