|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Bhuvan Chennoju
Join Date: Oct 2019
Posts: 1
Rep Power: 0 ![]() |
I am trying to set a variable wall temperature boundary condition for combustion problem for 'Reacting solver'
my Computational domain is (LWH)=(0.07,0.02,0.002)mm channel which, I meshed with BlockMeshDict with (700,50,50) in three directions. Meanwhile, for temperature profile loaded as the .csv file with 2 columns as the temperature is scalar. but once I ran the case, the following error popped, which was never seen before by me, but it's a print stack error which as far I know divde by zero error. Please, anyone, help me with this case? |
|
![]() |
![]() |
![]() |
Tags |
boundary condition error, fixed temperature, openfoam 1806, variable bc |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
Centrifugal fan | j0hnny | CFX | 13 | October 1, 2019 13:55 |
Basic Nozzle-Expander Design | karmavatar | CFX | 20 | March 20, 2016 08:44 |
Accessing multiple boundary patches from a custom boundary condition file | ripudaman | OpenFOAM Programming & Development | 0 | October 22, 2014 18:34 |
Radiation interface | hinca | CFX | 15 | January 26, 2014 17:11 |