Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

BCs for Natural ventilation (convection)

Updated Threads

Reply

Search this Thread

July 20, 2019, 12:23	BCs for Natural ventilation (convection)	#1
shuailiao New Member shuailiao Join Date: Jul 2019 Posts: 10 Rep Power: 7	Hi: I am using buoyantBuossineqPimple Foam to simulate natural ventilation in an enclosure with inlet on the top and outlet at the bottom. So what boundary conditions should be assigned to inlet and outlet so flow can only be sucked in inlet because of pressure difference and denser air flow out from outlet ? Thank you everyone!

Reply

Tags

boundary conditions

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BCs for Natural ventilation (convection)	shuailiao	OpenFOAM Pre-Processing	0	July 20, 2019 08:13
Mixed Convection BCs	deji	OpenFOAM	1	August 20, 2012 17:09
Modeling both radiation and convection on surfaces - Ansys Transient Thermal R13	s.mishra	ANSYS	0	March 31, 2012 05:12
Free convection BCs	Craig Hildreth	CFX	1	February 24, 2008 17:45
giving natural and forced convection bc's	Venu Gopal	FLUENT	0	August 29, 2004 11:59

All times are GMT -4. The time now is 17:06.