|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Join Date: May 2017
Posts: 8
Rep Power: 9 ![]() |
Hi all,
I'm launching simulations with a solver that i developed for a deforming elastic body. I calculate the displacements with a displacementEqn, then i move the mesh (similarly to the solid mechanics solvers in foam-extend). Then, i calculate the density of the deformed particles as follows: Code:
forAll(rho, cellI) { rho[cellI] = mass[cellI] / (mesh.V())[cellI]; } |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Add Mesh Layers doesnt work on the whole surface | Kryo | OpenFOAM Meshing & Mesh Conversion | 13 | February 17, 2022 07:34 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
Explicitly filtered LES | saeedi | Main CFD Forum | 16 | October 14, 2015 11:58 |
moving mesh in parallel mode | Karteek | Siemens | 4 | June 16, 2008 04:12 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |