|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Katsantonis Michalis
Join Date: Dec 2017
Posts: 21
Rep Power: 8 ![]() |
Greetings Foamers,
i have to simulate (2D) heat storage in fluidized or packed bed for my thesis (i just want to maximize heat transfer from air to sand). With my minimal knowledge with OpenFOAM, i 'm trying it with the tsoPhaseEulerFoam solver, without being sure if it 's the most suitable. (i really don't even know how to express my simulation ![]() My BC's are still fluent (i 'm gonna change the value to the desirable result), but i assume for now that air at 150oCelsius is blown to sand at room temperature in a tank with atmospheric pressure. The documentation of the solver says that it includes heat transfer, but when i run a simulation adjusted like below (if i am doing everything correctly), i hardly see any difference to the final temperature of the particles, and that is my main problem. I 'm pretty much desperate, if anyone can help... Much obliged in advance |
|
![]() |
![]() |
![]() |
Tags |
heat transfer, twophaseeulerfoam |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Radiation in semi-transparent media with surface-to-surface model? | mpeppels | CFX | 11 | August 22, 2019 07:30 |
Selecting Heat Transfer Boundary Conditions | Hoppe | FLUENT | 3 | July 10, 2016 23:23 |
Heat Transfer in Porous Medium | eryan | STAR-CD | 0 | September 28, 2010 13:14 |
Convective Heat Transfer - Heat Exchanger | Mark | CFX | 6 | November 15, 2004 15:55 |
Low Re k-e model and heat transfer | Abhijit Tilak | Main CFD Forum | 1 | July 5, 2000 05:32 |