How to set pressure based flow conditions in dsmc

vighnesh.j · September 27, 2017, 09:04

Hello everyone i am solving the gas flow using dsmcfoam solver in openfoam.My case is based upon the pressure relation at the inlet amd outlet and accordingly the values(macroscopic properties)are to be calculated.I am unable to find tge pressure file in dsmcfoam tutorials files.Can the pressure type solution be solved in dsmc solver?Can anyone help me?

ano · September 28, 2017, 19:35

Hi Vignesh,

in the official dsmcFoam version pressure boundary conditions do not exist yet.

There is a group in UK who included these kind of boundary conditions in OF2.4. Their code is on:
https://github.com/MicroNanoFlows/OpenFOAM-2.4.0-MNF

They changed the structure of BCs, so that it is not directly transferable to the official OpenFoam. You have to install their version.

The BCs they offer are in https://github.com/MicroNanoFlows/Op...eralBoundaries

Also their case structure is different from the official version.

vighnesh.j · September 29, 2017, 07:56

Hi ano,

Thank you for sharing your information. 😊

September 27, 2017, 09:04	How to set pressure based flow conditions in dsmc	#1
vighnesh.j New Member Jujjavarapu Vighnesh Join Date: Apr 2017 Posts: 9 Rep Power: 9	Hello everyone i am solving the gas flow using dsmcfoam solver in openfoam.My case is based upon the pressure relation at the inlet amd outlet and accordingly the values(macroscopic properties)are to be calculated.I am unable to find tge pressure file in dsmcfoam tutorials files.Can the pressure type solution be solved in dsmc solver?Can anyone help me?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with SIMPLEC-like finite volume channel flow boundary conditions	ghobold	Main CFD Forum	3	June 15, 2015 12:14
Inlet Boundary conditions for pressure driven flow in DSMC	Jesgonse	OpenFOAM Programming & Development	5	October 3, 2014 10:52
Low Mixing time Problem	Mavier	CFX	5	April 29, 2013 01:00
flow simulation across a small fan	jane luo	Main CFD Forum	15	April 12, 2004 18:49
Hydrostatic pressure in 2-phase flow modeling (long)	DS & HB	Main CFD Forum	0	January 8, 2000 16:00

September 28, 2017, 19:35		#2
ano Member ano Join Date: Jan 2017 Location: Delft Posts: 58 Rep Power: 10	Hi Vignesh, in the official dsmcFoam version pressure boundary conditions do not exist yet. There is a group in UK who included these kind of boundary conditions in OF2.4. Their code is on: https://github.com/MicroNanoFlows/OpenFOAM-2.4.0-MNF They changed the structure of BCs, so that it is not directly transferable to the official OpenFoam. You have to install their version. The BCs they offer are in https://github.com/MicroNanoFlows/Op...eralBoundaries Also their case structure is different from the official version.

September 29, 2017, 07:56		#3
vighnesh.j New Member Jujjavarapu Vighnesh Join Date: Apr 2017 Posts: 9 Rep Power: 9	Hi ano, Thank you for sharing your information. 😊