solidDisplacementFoam convergence

ufocfd · September 28, 2016, 16:08

Any suggestions please, on how to address convergence issues with solidDisplacementFoam?

The solver seems to be blowing-up at the edge of the mesh, in an un-stressed region.

Looks like a mesh quality issue at the 4 non-orthogonal cells at the end of the beam.

(see pics below)

https://drive.google.com/open?id=0B4...kUwbWFnNURwejQ

https://drive.google.com/open?id=0B4...290cnRyV3p4VnM

https://drive.google.com/open?id=0B4...XktYU9aNWNYczg

ufocfd · September 29, 2016, 07:34

seems to be fixed (converges properly) by changing planeStress back to "yes", in mechanicalProperties file !

September 28, 2016, 16:08	solidDisplacementFoam convergence	#1
ufocfd Senior Member Giles Richardson Join Date: Jun 2012 Location: Cambs UK Posts: 102 Rep Power: 14	Any suggestions please, on how to address convergence issues with solidDisplacementFoam? The solver seems to be blowing-up at the edge of the mesh, in an un-stressed region. Looks like a mesh quality issue at the 4 non-orthogonal cells at the end of the beam. (see pics below) https://drive.google.com/open?id=0B4...kUwbWFnNURwejQ https://drive.google.com/open?id=0B4...290cnRyV3p4VnM https://drive.google.com/open?id=0B4...XktYU9aNWNYczg Last edited by ufocfd; September 29, 2016 at 06:36.

September 29, 2016, 07:34	planeStress = yes	#2
ufocfd Senior Member Giles Richardson Join Date: Jun 2012 Location: Cambs UK Posts: 102 Rep Power: 14	seems to be fixed (converges properly) by changing planeStress back to "yes", in mechanicalProperties file !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Convergence	Centurion2011	FLUENT	48	June 15, 2022 00:29
In the case of convergence	aja1345	FLUENT	1	July 31, 2015 04:58
CFX overwhelming Fluent in mass convergence of boundary layer separation case	Pierre1	FLUENT	7	March 26, 2015 22:43
Force can not converge	colopolo	CFX	13	October 4, 2011 23:03
Convergence of CFX field in FSI analysis	nasdak	CFX	2	June 29, 2009 02:17