Unknown turbulenceModel type RASModel

huecu588755 · July 27, 2016, 04:57

I have just installed the Openfoam v 2.0.0. And try to test the case in pimplefoam and find this problem.

--> FOAM FATAL ERROR:
Unknown turbulenceModel type RASModel

Valid turbulenceModel types:

1
(
laminar
)

I have compile the turbulence Model in scr folder. So where can I add the RAS and LES model.

foadsf · January 24, 2018, 13:37

I was able to solve the error by updating some of the files. The issue arises because the syntax between 2.x and newer versions has changed. Complete instructions here:
https://stackoverflow.com/questions/...28177#48428177

July 27, 2016, 04:57	Unknown turbulenceModel type RASModel	#1
huecu588755 New Member Peter Hu Join Date: Oct 2015 Posts: 16 Rep Power: 11	I have just installed the Openfoam v 2.0.0. And try to test the case in pimplefoam and find this problem. --> FOAM FATAL ERROR: Unknown turbulenceModel type RASModel Valid turbulenceModel types: 1 ( laminar ) I have compile the turbulence Model in scr folder. So where can I add the RAS and LES model.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
second order schemes	marine	OpenFOAM	67	April 11, 2022 19:19
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 06:38
Modified pimpleFoam solver to MRFPimpleFoam solver	hiuluom	OpenFOAM Programming & Development	12	June 14, 2015 22:22
Boundary Conditions	MtnRunBeachBum	OpenFOAM Pre-Processing	1	April 30, 2015 17:33
compressible two phase flow in CFX4.4	youngan	CFX	0	July 2, 2003 00:32

January 24, 2018, 13:37		#2
foadsf Member Foad Join Date: Aug 2017 Posts: 58 Rep Power: 9	I was able to solve the error by updating some of the files. The issue arises because the syntax between 2.x and newer versions has changed. Complete instructions here: https://stackoverflow.com/questions/...28177#48428177