Conjugate heat transfer

jev · April 22, 2016, 22:55

Hi...
I am trying to learn chtMultiRegionSimpleFoam. I ran the tutorial problem multiRegionHeaterRadiation. In that example, i dont understand where to give heater dimensions. I would like to modify this problem with a single heater at the bottom of a channel through which there is air flow. Can anyone help me?
Thank you..

zfaraday · April 23, 2016, 12:30

Hi jev,

First of all, if you are taking your first stepms with this solver I strongly recomend you to take a look at this tutorial! This is an introductory simple case to chtMultiRegion* solvers. After that, you can start doing your own things, but first you have to train yourself hard with the planeWall2D tutorial!

Besides that, I also recomend you to take a look at mi site, since there I have some tutorials about conjugate heat transfer and radiation in OpenFOAM.

Hope it helps,

Alex

jev · April 23, 2016, 22:39

Thank you very much ...

April 22, 2016, 22:55	Conjugate heat transfer	#1
jev New Member jev Join Date: May 2013 Posts: 8 Rep Power: 13	Hi... I am trying to learn chtMultiRegionSimpleFoam. I ran the tutorial problem multiRegionHeaterRadiation. In that example, i dont understand where to give heater dimensions. I would like to modify this problem with a single heater at the bottom of a channel through which there is air flow. Can anyone help me? Thank you..

April 23, 2016, 12:30		#2
zfaraday Senior Member Alex Join Date: Oct 2013 Posts: 337 Rep Power: 22	Hi jev, First of all, if you are taking your first stepms with this solver I strongly recomend you to take a look at this tutorial! This is an introductory simple case to chtMultiRegion* solvers. After that, you can start doing your own things, but first you have to train yourself hard with the planeWall2D tutorial! Besides that, I also recomend you to take a look at mi site, since there I have some tutorials about conjugate heat transfer and radiation in OpenFOAM. Hope it helps, Alex __________________ Web site where I present my Master's Thesis: foamingtime.wordpress.com The case I talk about in this site was solved with chtMultiRegionSimpleFoam solver and involves radiation. Some basic tutorials are also resolved step by step in the web. If you are interested in these matters, you are invited to come in!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Difficulty In Setting Boundary Conditions	Moinul Haque	CFX	4	November 25, 2014 18:30
VOF with conjugate heat transfer	vs138	Fluent Multiphase	1	November 12, 2014 09:52
fireFoam - conjugate heat transfer	Duy Le	OpenFOAM Programming & Development	0	October 2, 2014 11:48
conjugate heat transfer in porous media-variable HTC	hmasenger	CFX	3	June 21, 2014 08:57
Conjugate Heat transfer in CFX	ksp1717	CFX	11	December 10, 2010 23:07

April 23, 2016, 22:39		#3
jev New Member jev Join Date: May 2013 Posts: 8 Rep Power: 13	Thank you very much ...