Using Porous Media on twoPhaseEulerFoam

avila.vc · March 2, 2016, 17:28

I am trying to use fvOptions to set porositySource on a case with twoPhaseEulerFoam solver. It runs, but there is no change with porosity source on or off, it appears it is not considering the porosity source.

my fvOptions is just like angleDuct from interFoam

Have anyone been able to use a porosity source on twoPhaseEulerFoam?

mshehata85 · March 3, 2016, 20:44

I am facing the same problem. even in interFoam, the results of both the "damBreak" and "damBreakPorousBaffle" cases seems the same. I hope someone could help.

jason · June 24, 2016, 13:38

Hi there,

Just wondering, did you ever get twoPhaseEulerFoam working with porous regions?

I have posted in this post too, having problems getting this working....

http://www.cfd-online.com/Forums/ope...tml#post606492

Jason

us7 · March 28, 2017, 17:02

Hello there,
I am also trying to add porosity but no luck. did you find the solution to add porosity into twoPhaseEulerFoam ?

Regards,
Umer

FelicityNWU · March 14, 2018, 09:09

Hello there

Did anyone find solution to the problem? Im struggling with the same problem

March 2, 2016, 17:28	Using Porous Media on twoPhaseEulerFoam	#1
avila.vc Member Vinícius da Costa Ávila Join Date: Jul 2015 Location: Porto Alegre, Brazil Posts: 62 Rep Power: 11	I am trying to use fvOptions to set porositySource on a case with twoPhaseEulerFoam solver. It runs, but there is no change with porosity source on or off, it appears it is not considering the porosity source. my fvOptions is just like angleDuct from interFoam Have anyone been able to use a porosity source on twoPhaseEulerFoam? __________________ Vinícius dC.A.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiphase Porous Media Flow - Convergence Issues	VT_Bromley	FLUENT	8	May 30, 2024 03:59
Porous media setup issues in Fluent	Bernard Van	FLUENT	29	January 26, 2017 05:09
How to model granular flow through porous media	Axius	FLUENT	2	August 7, 2014 11:34
species mass source in porous media ?	PK	FLUENT	0	February 16, 2007 12:12
porous media: Fluent or Star-CD?	Igor	Main CFD Forum	0	December 5, 2002 16:16

March 3, 2016, 20:44		#2
mshehata85 New Member Mahmoud Shehata Join Date: Mar 2015 Posts: 13 Rep Power: 11	I am facing the same problem. even in interFoam, the results of both the "damBreak" and "damBreakPorousBaffle" cases seems the same. I hope someone could help.

June 24, 2016, 13:38		#3
jason Member Jason Dale Join Date: Mar 2009 Location: UK Posts: 80 Rep Power: 17	Hi there, Just wondering, did you ever get twoPhaseEulerFoam working with porous regions? I have posted in this post too, having problems getting this working.... http://www.cfd-online.com/Forums/ope...tml#post606492 Jason

March 28, 2017, 17:02		#4
us7 New Member Umer Join Date: Aug 2016 Posts: 29 Rep Power: 10	Hello there, I am also trying to add porosity but no luck. did you find the solution to add porosity into twoPhaseEulerFoam ? Regards, Umer

March 14, 2018, 09:09		#5
FelicityNWU New Member Felicity Join Date: Jan 2018 Location: South Africa Posts: 3 Rep Power: 8	Hello there Did anyone find solution to the problem? Im struggling with the same problem