dynamic mesh case based of an interFoam case

maxonline · January 28, 2016, 04:49

Hallo,
I'm running an interFoam case of a plunger valve. Now I want to transform the case into a dynamic mesh case (interDyFoam) so that the plunger moves.
I have never worked with dynamic meshes and all die different mesh-manipulation models, solvers and diffusivity models confuse me.

Does someone have a simple tutorial of a dynamic mesh case basically created with blockMesh and snappyHexMesh?
Maybe a hint which configurations I need?

Thanks - Max

wyldckat · January 31, 2016, 14:36

Quick answer: OpenFOAM has at least tutorial case that fits your description: "incompressible/pimpleDyMFoam/movingCone"
My advice: run this tutorial case with the command:

Code:

foamRunTutorials

Then open the case in ParaView with paraFoam. See what the results and case look like, because from there you will start to imagine what you need to look for in this case.

maxonline · February 1, 2016, 05:12

I have been running this tutorial but there is no meshModifier in this tutorial. I need the movement of the plunger and have layer addition/removal.

I am working with OF 2.3.0 and I can't find a tutorial which includes layer addition/removal. Where can I find such a case?

wyldckat · February 21, 2016, 15:13

Quick answer: Unfortunately there doesn't seem to be an example for this yet for OpenFOAM. There are a few attempts made and/or it should work on foam-extend:

January 31, 2016, 14:36		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,981 Blog Entries: 45 Rep Power: 128	Quick answer: OpenFOAM has at least tutorial case that fits your description: "incompressible/pimpleDyMFoam/movingCone" My advice: run this tutorial case with the command: Code: foamRunTutorials Then open the case in ParaView with paraFoam. See what the results and case look like, because from there you will start to imagine what you need to look for in this case. __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

February 21, 2016, 15:13		#4
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,981 Blog Entries: 45 Rep Power: 128	Quick answer: Unfortunately there doesn't seem to be an example for this yet for OpenFOAM. There are a few attempts made and/or it should work on foam-extend: http://www.cfd-online.com/Forums/ope...amic-mesh.html http://www.cfd-online.com/Forums/ope...imulation.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Reconstruction of the parallel case with dynamic mesh	makaveli_lcf	OpenFOAM Post-Processing	8	December 3, 2024 12:16
Gambit problems	Althea	FLUENT	22	January 4, 2017 04:19
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 07:20
Dynamic Mesh in an In-cylinder case	venkitaraman	FLUENT	0	March 26, 2007 18:15
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 10:38

February 1, 2016, 05:12		#3
maxonline New Member Max Join Date: May 2011 Location: Nuremberg Posts: 17 Rep Power: 15	I have been running this tutorial but there is no meshModifier in this tutorial. I need the movement of the plunger and have layer addition/removal. I am working with OF 2.3.0 and I can't find a tutorial which includes layer addition/removal. Where can I find such a case?