|
[Sponsors] |
Use direct numerical simulation on engineFoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 20, 2013, 10:15 |
Use direct numerical simulation on engineFoam
|
#1 |
New Member
Lachapelle Maxime
Join Date: Oct 2013
Posts: 5
Rep Power: 12 |
Hi everyones,
I'm a new user and I'm working on the tutorial engineFoam to simulate the flow around the valves, but i need to change the Reynolds number at around 50 or 100. For that i have to change the viscosity and the pitch of the mesh. So i was looking at the transport properties file but i didn't found it. If someone can explain to me how to proceed cause i really have no idea. Thanks, Maxime. |
|
October 21, 2013, 14:54 |
Use direct numerical simulation on engineFoam
|
#2 |
New Member
Lachapelle Maxime
Join Date: Oct 2013
Posts: 5
Rep Power: 12 |
I make a copy of the engineFoam solver and modify the Ueq.H file like this:
PHP Code:
I also add in combustion properties the value of nu. But when i'm running i got an error: " can't found engineFoamdns". If someone has an idea of the source of the problem or tell me what i'm doing wrong ? Thanks you! Maxime. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TimeVaryingMappedFixedValue for Direct Numerical Simulation inlet | johndeas | OpenFOAM | 5 | May 21, 2014 07:11 |
Direct Simulation Monte Carlo in Fluent? | spk | FLUENT | 0 | September 9, 2011 08:59 |
About numerical filtering in direct simulation? | leaf | Main CFD Forum | 0 | June 20, 2006 01:57 |
numerical simulation of sails | Jerome JOURNADE | Main CFD Forum | 6 | June 3, 1999 13:30 |
Solid-Liquid Two Phase Flow Numerical Simulation with the Finite Element Method | Qing Hao | Main CFD Forum | 2 | January 8, 1999 23:31 |