formula implementation

sanjar · September 9, 2013, 05:49

Hey FOAMers,

I have a special kind of problem and I am not that good in the C++language to handle it on my own. The problem is decribed in the following. I made a simulation with particles in a fluid, which land on a plate. This plate is made of a material which shows an erosive characteristic due to the particles. The thing i want to do now is to show with values (as results of a given formula) how much material is going to get off caused by the particles.
Is is not necessary to show it on the simulation. There is no need for that. I just want to show it with values. To define it a little bit more: I used unCoupledKinematicParcelFoam to solve my simulation. And the only value i need to calculate with the formula is the last time-folder. Thats all.

BTW, the formula i was tlking about is the erosion model formula of finnie.

Is there anybody who has an idea or who could help me through this work. I really dont know anything about implemetation of a formula in a OF simulation. At least it is only the last time-folder which has to be worked on.

it would be perfect if there is somebody who take a few minutes to help me out of this problem.

thank you guys

Dommy · September 9, 2013, 09:19

Hey Sanjar,

glad you solved your problem so far!

If its only a formular and only in the last time folder why dont you calculate the value by using any kind of programming language you are familiar with?
As far as I can see (and I don`t have any idea about erosive characteristic - just looked up the formular) there is no need to actually implement something in OF because further calculations are not based on the value you want to calculate - am I right?

Best,
Thomas

sanjar · September 11, 2013, 14:57

Hey Thomas,

yes i managed to start the simulation, because i was so lucky finding people who were ready to help me out!!! Relly great work moral.

Yes you are right and i was thinking about that in the beginning. Unfortunately i am not familiar with any program language (looked up in some c++ tuts and excercises). i wanted to know if there is a way to do that just for a first information.
it would be great if there is a way to insluce my formular into the simulation.

thank you for your advices and help!! i aprreciate them a lot!!!

sanjar · September 12, 2013, 13:35

Does somebody else have a idea, too? every advice is welcomed. How would you guys handle this problem?

lots of greetings

September 9, 2013, 05:49	formula implementation	#1
sanjar Member ziehjay Join Date: Jul 2013 Posts: 45 Rep Power: 13	Hey FOAMers, I have a special kind of problem and I am not that good in the C++language to handle it on my own. The problem is decribed in the following. I made a simulation with particles in a fluid, which land on a plate. This plate is made of a material which shows an erosive characteristic due to the particles. The thing i want to do now is to show with values (as results of a given formula) how much material is going to get off caused by the particles. Is is not necessary to show it on the simulation. There is no need for that. I just want to show it with values. To define it a little bit more: I used unCoupledKinematicParcelFoam to solve my simulation. And the only value i need to calculate with the formula is the last time-folder. Thats all. BTW, the formula i was tlking about is the erosion model formula of finnie. Is there anybody who has an idea or who could help me through this work. I really dont know anything about implemetation of a formula in a OF simulation. At least it is only the last time-folder which has to be worked on. it would be perfect if there is somebody who take a few minutes to help me out of this problem. thank you guys

September 9, 2013, 09:19		#2
Dommy New Member Thomas F. Join Date: Jun 2013 Location: Graz, Austria Posts: 14 Rep Power: 13	Hey Sanjar, glad you solved your problem so far! If its only a formular and only in the last time folder why dont you calculate the value by using any kind of programming language you are familiar with? As far as I can see (and I don`t have any idea about erosive characteristic - just looked up the formular) there is no need to actually implement something in OF because further calculations are not based on the value you want to calculate - am I right? Best, Thomas Last edited by Dommy; September 10, 2013 at 04:55.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Implementation of the drag coefficient Formula	Mirage12	OpenFOAM Post-Processing	4	August 5, 2013 02:11
doubts on the formula of near-bed concentration in volume	superhugo	Main CFD Forum	1	April 27, 2012 03:28
Implementation issues of fvSchemes / laplacianScheme, in particular gaussLaplacianSch	thomek	OpenFOAM Programming & Development	0	October 18, 2010 06:10
Please explain the implementation of species transport Eqn in reactingFoam	kallipygian	OpenFOAM Running, Solving & CFD	0	October 13, 2008 08:29
Benetton Formula 1	CD adapco Group Marketing	Siemens	13	February 7, 2002 10:33

September 11, 2013, 14:57		#3
sanjar Member ziehjay Join Date: Jul 2013 Posts: 45 Rep Power: 13	Hey Thomas, yes i managed to start the simulation, because i was so lucky finding people who were ready to help me out!!! Relly great work moral. Yes you are right and i was thinking about that in the beginning. Unfortunately i am not familiar with any program language (looked up in some c++ tuts and excercises). i wanted to know if there is a way to do that just for a first information. it would be great if there is a way to insluce my formular into the simulation. thank you for your advices and help!! i aprreciate them a lot!!!

September 12, 2013, 13:35		#4
sanjar Member ziehjay Join Date: Jul 2013 Posts: 45 Rep Power: 13	Does somebody else have a idea, too? every advice is welcomed. How would you guys handle this problem? lots of greetings