[musahossein]

Dear all:

I am trying to use the following code in controldict for the sloshingTank2D case.

forces
{
type forces;
functionObjectLibs ("libforces.so"); //Lib to load
outputControl outputTime;
patches (leftWall rightWall);
pName p;
UName U;
rhoName rhoInf;
rhoInf 998.2; //Reference density for fluid
nuInf 1e-06;
CofR (0 0 0); //Origin for moment calculations

outputControl timeStep;
outputInterval 1;
}

My settings in RASproperties file is as follows:

FoamFile
{
version 2.0;
format ascii;
class dictionary;
location "constant";
object RASProperties;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

RASModel laminar;

turbulence off;

printCoeffs on;

// ************************************************** *********************** //

My settings in turbulence properties is as follows:

FoamFile
{
version 2.0;
format ascii;
class dictionary;
location "constant";
object turbulenceProperties;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

// simulationType laminar;

simulationType RASModel;

// ************************************************** *********************** //

The above settings are based on a post in this forum by mturcios777 dated December 5 2012 where he states that the above settings are required to address the way interDyMFoam deals with laminar flow for two phase problems. After doing this, and running the case in parallel, I get the following error. Can anyone tell me what this error means. It looks like something is being duplicated somewhere, but I dont know where and why.

Thanks in advance.

Duplicate entry alphatJayatillekeWallFunction in runtime selection table fvPatchField
#0 /opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so(_ZN4Foam5error14safePrintStackERSo+ 0x25) [0x7f221a8c95c5]
#1 /opt/openfoam221/platforms/linux64GccDPOpt/lib/libcompressibleRASModels.so(_ZN4Foam12fvPatchField IdE31adddictionaryConstructorToTableINS_12compress ible47alphatJayatillekeWallFunctionFvPatchScalarFi eldEEC1ERKNS_4wordE+0x9f) [0x7f220a06c2ef]
#2 /opt/openfoam221/platforms/linux64GccDPOpt/lib/libcompressibleRASModels.so(+0xc235b) [0x7f2209f9735b]
#3 /lib64/ld-linux-x86-64.so.2(+0xf876) [0x7f221ec2d876]
#4 /lib64/ld-linux-x86-64.so.2(+0xf930) [0x7f221ec2d930]
#5 /lib64/ld-linux-x86-64.so.2(+0x13fdf) [0x7f221ec31fdf]
#6 /lib64/ld-linux-x86-64.so.2(+0xf706) [0x7f221ec2d706]
#7 /lib64/ld-linux-x86-64.so.2(+0x13809) [0x7f221ec31809]
#8 /lib/x86_64-linux-gnu/libdl.so.2(+0x1026) [0x7f221a12e026]
#9 /lib64/ld-linux-x86-64.so.2(+0xf706) [0x7f221ec2d706]
#10 /lib/x86_64-linux-gnu/libdl.so.2(+0x163c) [0x7f221a12e63c]
#11 /lib/x86_64-linux-gnu/libdl.so.2(dlopen+0x31) [0x7f221a12e0c1]
#12 /opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so(_ZN4Foam6dlOpenERKNS_8fileNameEb+0x 43) [0x7f221a8c36c3]
#13 /opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so(_ZN4Foam14dlLibraryTable4openERKNS_ 8fileNameEb+0x69) [0x7f221a643e59]
#14 /opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so(_ZN4Foam14dlLibraryTable4openIPNS_9 HashTableIPFNS_7autoPtrINS_14functionObjectEEERKNS _4wordERKNS_4TimeERKNS_10dictionaryEES6_NS_6string 4hashEEEEEbSE_S8_RKT_+0x150) [0x7f221a64e710]
#15 /opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so(_ZN4Foam14functionObject3NewERKNS_4 wordERKNS_4TimeERKNS_10dictionaryE+0x100) [0x7f221a64d8a0]
#16 /opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so(_ZN4Foam18functionObjectList4readEv +0x4f8) [0x7f221a64f968]
#17 /opt/openfoam221/platforms/linux64GccDPOpt/lib/libOpenFOAM.so(_ZNK4Foam4Time3runEv+0xdc) [0x7f221a65b3cc]
#18 interDyMFoam() [0x434c8d]
#19 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f2219568ea5]
#20 interDyMFoam() [0x43c56d]

[MaLa]

Hi Musaddeque

Did you figure out a solution to 'Duplicate entry ...'. I have the same error message.

[MaLa]

Okay, figured it out. If you delete the dep file and re-run wmake libso, the problem gets solved.

I think the problem arises because the library doesn't delete the old existing *.o files and there was one such file with the same name as an implemented turbulence model, that was causing a conflict.

[wenxu]

Dear,Manan,
Where is the dep file ? In which folder? I can not find it, I encounter the same problem.
Thank you in advance.

regards,
wenxu

[musahossein]

Originally Posted by wenxu

Dear,Manan,
Where is the dep file ? In which folder? I can not find it, I encounter the same problem.
Thank you in advance.

regards,
wenxu

The bunch of messages you see do not affect the analysis. There is a patch available that stops the solver from sending these messages to the screen. I will try and put a link here once I find it.

[musahossein]

Originally Posted by MaLa

Hi Musaddeque

Did you figure out a solution to 'Duplicate entry ...'. I have the same error message.

Check out this link to posts on this issue. Scroll down a few messages and look at the one by wyldcat. He discusses this problem and fixes.


http://www.cfd-online.com/Forums/ope...tml#post463184