Solver for compressible two fluid mixing with heat transfer

inf.vish · July 30, 2013, 06:33

I would like to know if there is any solver for simulating this simple case.
I have air flowing in at 300K through one inlet. air at 600K is flowing perpendicular to the before mentioned flow and is mixing with it. The geometry is T shaped, two inputs, one output. I want to see how the mixing of the air happens and how the temperature distribution is.

inf.vish · July 30, 2013, 06:43

P.S. I am new to OpenFOAM

Annier · July 31, 2013, 10:33

Dear Vishal,
there is a standard solver twoLiquidMixingFoam in OpenFoam.

Annier · July 31, 2013, 10:38

the solver twoLiquidMixingFoam is for incompressible flow. in my thought, if the flow can be assumed incompressible, you can use this solver for your simulation.

inf.vish · July 31, 2013, 10:39

okay, thanks

July 30, 2013, 06:33	Solver for compressible two fluid mixing with heat transfer	#1
inf.vish Member Vishal Join Date: Jul 2013 Posts: 73 Rep Power: 13	I would like to know if there is any solver for simulating this simple case. I have air flowing in at 300K through one inlet. air at 600K is flowing perpendicular to the before mentioned flow and is mixing with it. The geometry is T shaped, two inputs, one output. I want to see how the mixing of the air happens and how the temperature distribution is.

July 31, 2013, 10:33	Please use the multiphase flow solver	#3
Annier Member Anil Kunwar Join Date: Jun 2013 Posts: 64 Rep Power: 12	Dear Vishal, there is a standard solver twoLiquidMixingFoam in OpenFoam.

July 31, 2013, 10:38	is the flow really compressible?	#4
Annier Member Anil Kunwar Join Date: Jun 2013 Posts: 64 Rep Power: 12	the solver twoLiquidMixingFoam is for incompressible flow. in my thought, if the flow can be assumed incompressible, you can use this solver for your simulation.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 06:21
Porous domain:Interfacial area density and heat transfer coefficient	l.te	CFX	2	May 18, 2014 00:45
Heat Transfer from Solid to Adjacent Solid and then to Adjacent Fluid	dkx209	FLUENT	1	July 18, 2013 10:50
CFX doesn't continue calculation...	mactech001	CFX	6	November 15, 2009 22:25
Natural convection - Inlet boundary condition	max91	CFX	1	July 29, 2008 21:28

July 30, 2013, 06:43		#2
inf.vish Member Vishal Join Date: Jul 2013 Posts: 73 Rep Power: 13	P.S. I am new to OpenFOAM

July 31, 2013, 10:39		#5
inf.vish Member Vishal Join Date: Jul 2013 Posts: 73 Rep Power: 13	okay, thanks