CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

is internalField(U) equivalent to zeroGradient?

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 6, 2013, 18:09
Default is internalField(U) equivalent to zeroGradient?
  #1
Senior Member
 
immortality's Avatar
 
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 27
immortality is on a distinguished road
when I set BC for U to zeroGradient or:
Code:
right
    {
     type groovyBC;
     fractionExpression "0";
     gradientExpression "vector(0,0,0)";
    }
it answers without any error
but when I set it to:
Code:
right
    {
     type groovyBC;
     fractionExpression "1";
     valueExpression "internalField(U)";//vector(internalField(U).x,0,0)
    }
it falls to an error on T(energy equation probably) as so:
Code:
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -3333091.721
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 4080511.561
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -7124696.499
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 5774453.414
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -6575768.989
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 5981361.409
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 1404258.482
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -17090209.16
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 36020792.5
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -94818398.64
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 40233402.34
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -106376680.8
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 37389446.51
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -76115211.3
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -24650104.63
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -26951665.22
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 471535.4463
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 465677.0027
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 277204.4414
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -145721.0621
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 15779.92442
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 112883.4828
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -3083.273126
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 43.52495911
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 4976486.257
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 3178348.937
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -32897237.32
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -44825686.95
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -22612.51171
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -1870.615087
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 9690.272357
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -39521.73991
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 93265.31041
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -340838.0148
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 610015.5259
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -1813983.217
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = 2650248.864
--> FOAM Warning :
From function janafThermo<EquationOfState>::limit(const scalar T) const
in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 108
attempt to use janafThermo<EquationOfState> out of temperature range 200 -> 6000;  T = -6558287.943
I thought that internalField(U) or vector(internalField(U).x,0,0) do the same way as zeroGradient(or in groovyBC gradientExpression"0" does).
why?
immortality is offline   Reply With Quote

Old   March 6, 2013, 18:15
Default
  #2
Senior Member
 
immortality's Avatar
 
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 27
immortality is on a distinguished road
is it possible to have the help of Mr.Gschaider if he doesn't have sulked?
immortality is offline   Reply With Quote

Old   March 7, 2013, 07:09
Default
  #3
Senior Member
 
immortality's Avatar
 
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 27
immortality is on a distinguished road
why they don't act the same way?
immortality is offline   Reply With Quote

Old   March 8, 2013, 04:47
Default
  #4
Senior Member
 
immortality's Avatar
 
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 27
immortality is on a distinguished road
does anyone have any experience or knowledge about this issue?
immortality is offline   Reply With Quote

Old   March 8, 2013, 10:30
Default
  #5
Senior Member
 
immortality's Avatar
 
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 27
immortality is on a distinguished road
dear Bernard whats your advice about it?
Its important to know your opinion because of your expertise on groovyBC.
Thank you for your and others comments.
immortality is offline   Reply With Quote

Old   March 10, 2013, 06:36
Default
  #6
Senior Member
 
immortality's Avatar
 
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 27
immortality is on a distinguished road
the question persists if anyone has an idea it will be thanked.
immortality is offline   Reply With Quote

Old   March 15, 2013, 05:22
Default
  #7
Senior Member
 
immortality's Avatar
 
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 27
immortality is on a distinguished road
is the question so much hard?
I only want to know the cause.why internalField and zeroGradient act differently in test although they seem should be the same?
immortality is offline   Reply With Quote

Old   March 29, 2013, 02:27
Default
  #8
Senior Member
 
immortality's Avatar
 
Ehsan
Join Date: Oct 2012
Location: Iran
Posts: 2,208
Rep Power: 27
immortality is on a distinguished road
no any answer?
immortality is offline   Reply With Quote

Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
second order schemes marine OpenFOAM 67 April 11, 2022 19:19
interFoam andrea.pasquali OpenFOAM 8 February 23, 2021 13:06
multiphaseInterFoam: timestep error by simulating a co-extrusion nozzle Quatschinsky OpenFOAM Running, Solving & CFD 7 March 27, 2014 06:08
[swak4Foam] Air Conditioned room groovyBC Sebaj OpenFOAM Community Contributions 7 October 31, 2012 15:16
Pressure instability with rhoSimpleFoam daniel_mills OpenFOAM Running, Solving & CFD 44 February 17, 2011 18:08


All times are GMT -4. The time now is 10:27.

Contact Us - CFD Online - Privacy Statement - Top