LES Delta wing vortex simulation

rafamusura · May 8, 2012, 13:41

Hi everyone, I'm having some big problems on finding the best turbulence model AND solver to use in my thesis proyect.

I's about simulating tha vortex generated by a delta wing installed face to the wind. (I have the mesh file, for gmsh, if someone would like to undestand it better).

The real thing is to analyze the data from the leeward side of the vortex generator because i have to correlate with the snow removal or snow acumulation, but without simulating a twophase flow.

PLEASE HELP!

I really don't know if pisofoam or pimplefoam, what type of trubulence model would be enough? smogorinsky? oneeqeddy?...thanks

qing123 · September 4, 2012, 09:01

Hi rafamusura: I have done some research about the delta wing, it is very resemble to yours. But your mesh file I could not see, could you send me your one copy mesh file to me, maybe I can give you some suggestions. My email is: 1402891092@qq.com

rafamusura · September 4, 2012, 12:44

Hi zhang

Thanks for replying, as you can see that post was on Feb, so I have done some advances and finally I doing my simulations with RANS and simpleFoam it's better because de LES simulation is too difficult in the subgridsacale.

I'll write you althoug to comment my results.

Greetings

May 8, 2012, 13:41	LES Delta wing vortex simulation	#1
rafamusura New Member Rafael Valenzuela Musura Join Date: Feb 2012 Posts: 27 Rep Power: 14	Hi everyone, I'm having some big problems on finding the best turbulence model AND solver to use in my thesis proyect. I's about simulating tha vortex generated by a delta wing installed face to the wind. (I have the mesh file, for gmsh, if someone would like to undestand it better). The real thing is to analyze the data from the leeward side of the vortex generator because i have to correlate with the snow removal or snow acumulation, but without simulating a twophase flow. PLEASE HELP! I really don't know if pisofoam or pimplefoam, what type of trubulence model would be enough? smogorinsky? oneeqeddy?...thanks

September 4, 2012, 09:01	About your question, may be I can help you.	#2
qing123 New Member zhang guoqing Join Date: May 2011 Posts: 10 Rep Power: 15	Hi rafamusura: I have done some research about the delta wing, it is very resemble to yours. But your mesh file I could not see, could you send me your one copy mesh file to me, maybe I can give you some suggestions. My email is: 1402891092@qq.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[GAMBIT] Need help with meshing 3D Delta wing	tuantran	ANSYS Meshing & Geometry	22	September 17, 2012 08:00
Problem w/ vortex ring simulation, mesh coarseness parameters?	ESC	FLUENT	2	September 4, 2012 11:56
Cd of Delta wing	chitharenjan	FLUENT	4	July 22, 2010 11:12
Setting up Flow around a Wing Simulation help	Atella	CFX	3	January 3, 2010 12:51
LES simulation of vortex shedding	Hans	Main CFD Forum	8	September 25, 2003 07:28

September 4, 2012, 12:44		#3
rafamusura New Member Rafael Valenzuela Musura Join Date: Feb 2012 Posts: 27 Rep Power: 14	Hi zhang Thanks for replying, as you can see that post was on Feb, so I have done some advances and finally I doing my simulations with RANS and simpleFoam it's better because de LES simulation is too difficult in the subgridsacale. I'll write you althoug to comment my results. Greetings