FGM combustion model

armanha95 · July 16, 2022, 13:22

hi im interested in FGMfoam solver source code for openfoamv7. can anyone send it to me?
aban.arman@gmail.com

edaymo · November 3, 2022, 19:48

Hello,

I've been learning about FGMFoam from the really helpful tutorial by Michael Bertsch, documented at http://http://www.tfd.chalmers.se/~h...rt_FGMFoam.pdf

The test case is setup for the GRI mechanism, and there are scripts included to generate flamelets with Cantera. However, the report mentions, "For a Matlab sript to generate 4D tables with the tabulation parameters PV, Z, varPV, and varZ, please contact Likun Ma."

I have not been able to reach Linkun Ma and I am wondering if anyone has created/published such a script so as to allow the use of a different mechanism with FGMFoam?

Thanks so much.

Eric

dlahaye · November 4, 2022, 03:39

More recent work is here https://repository.tudelft.nl/island...tion=education

Give it a look. In case of interest, I can look for the files.

edaymo · November 4, 2022, 21:00

The referenced work by Mr. Ubal is very nice. I am quite interested to learn more about the associated files, if possible.

Thank you for the quick reply and offer of assistance.

Best regards,

Eric

dlahaye · November 5, 2022, 06:40

I will talk to Prof. Dirk Roekaerts, see what I can arrange and get back to here.

Cheers, Domenico.

killu · December 13, 2022, 04:44

Hi everyone!

I'm also trying to compile the FGMFoam solver though I cannot find the required files that should be provided along with the FGMFoam report.

Can anyone send them to me? My email is engineeringlore@gmail.com

Thank you to anyone who replies!

jd01930 · June 13, 2024, 12:36

Hello edaymo,

Did you ever get a script that helped convert .csv files produced from Cantera to the 4D tables needed in FGMFoam? I am kind of stuck at the same point and have not heard from Likun Ma.

Thanks!

edaymo · June 13, 2024, 12:47

Hi,

@dlahaye was extremely kind to prepare a similar script. It can be found at: https://github.com/ziolai/software/b...neration.ipynb

I am not sure if this is 100% finished or not, presently the JuPyter notebook has an error in it. But it is much better documented than anything else I have seen for making the 4D tables.

Good luck!!

Best regards,

Eric

dlahaye · June 13, 2024, 16:48

Sadly, and very unfortunately, the work outlined at https://github.com/ziolai/software/b...neration.ipynb is by no means finished.

Volunteering helping hands would be wonderful to receive. Thanks!

July 16, 2022, 13:22	FGM source code needed	#81
armanha95 New Member iran Join Date: Jul 2021 Posts: 1 Rep Power: 0	hi im interested in FGMfoam solver source code for openfoamv7. can anyone send it to me? aban.arman@gmail.com

November 3, 2022, 19:48	Scripts to create tables for FGMFoam	#82
edaymo Member Eric Daymo Join Date: Feb 2015 Location: Gilbert, Arizona, USA Posts: 56 Rep Power: 12	Hello, I've been learning about FGMFoam from the really helpful tutorial by Michael Bertsch, documented at http://http://www.tfd.chalmers.se/~h...rt_FGMFoam.pdf The test case is setup for the GRI mechanism, and there are scripts included to generate flamelets with Cantera. However, the report mentions, "For a Matlab sript to generate 4D tables with the tabulation parameters PV, Z, varPV, and varZ, please contact Likun Ma." I have not been able to reach Linkun Ma and I am wondering if anyone has created/published such a script so as to allow the use of a different mechanism with FGMFoam? Thanks so much. Eric

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Liquid rocket engine non-premixed combustion model	Erik	FLUENT	2	November 28, 2013 15:09
second and final question about flamelet combustion model	AdidaKK	CFX	0	October 17, 2009 08:25
Combustion Model for CAI/HCCI - AVL FIRE	Patryk	Main CFD Forum	0	July 24, 2009 17:43
How to model combustion with only methane stream?	ligang zheng	FLUENT	2	May 1, 2007 10:16
combustion model	Hennie van der Westhuizen	Siemens	7	February 27, 2002 03:10

November 4, 2022, 03:39		#83
dlahaye Senior Member Domenico Lahaye Join Date: Dec 2013 Posts: 802 Blog Entries: 1 Rep Power: 19	More recent work is here https://repository.tudelft.nl/island...tion=education Give it a look. In case of interest, I can look for the files.

November 4, 2022, 21:00		#84
edaymo Member Eric Daymo Join Date: Feb 2015 Location: Gilbert, Arizona, USA Posts: 56 Rep Power: 12	The referenced work by Mr. Ubal is very nice. I am quite interested to learn more about the associated files, if possible. Thank you for the quick reply and offer of assistance. Best regards, Eric

November 5, 2022, 06:40		#85
dlahaye Senior Member Domenico Lahaye Join Date: Dec 2013 Posts: 802 Blog Entries: 1 Rep Power: 19	I will talk to Prof. Dirk Roekaerts, see what I can arrange and get back to here. Cheers, Domenico.

December 13, 2022, 04:44		#86
killu New Member Join Date: Nov 2021 Posts: 1 Rep Power: 0	Hi everyone! I'm also trying to compile the FGMFoam solver though I cannot find the required files that should be provided along with the FGMFoam report. Can anyone send them to me? My email is engineeringlore@gmail.com Thank you to anyone who replies!

June 13, 2024, 12:36		#87
jd01930 New Member Jonathan Join Date: Sep 2022 Posts: 6 Rep Power: 4	Hello edaymo, Did you ever get a script that helped convert .csv files produced from Cantera to the 4D tables needed in FGMFoam? I am kind of stuck at the same point and have not heard from Likun Ma. Thanks!

June 13, 2024, 12:47		#88
edaymo Member Eric Daymo Join Date: Feb 2015 Location: Gilbert, Arizona, USA Posts: 56 Rep Power: 12	Hi, @dlahaye was extremely kind to prepare a similar script. It can be found at: https://github.com/ziolai/software/b...neration.ipynb I am not sure if this is 100% finished or not, presently the JuPyter notebook has an error in it. But it is much better documented than anything else I have seen for making the 4D tables. Good luck!! Best regards, Eric

June 13, 2024, 16:48		#89
dlahaye Senior Member Domenico Lahaye Join Date: Dec 2013 Posts: 802 Blog Entries: 1 Rep Power: 19	Sadly, and very unfortunately, the work outlined at https://github.com/ziolai/software/b...neration.ipynb is by no means finished. Volunteering helping hands would be wonderful to receive. Thanks!