creating/compiling own application

raagh77 · March 17, 2009, 12:01

Hi all,

Just to increase my knowledge in OF

am trying to create/compile my own application (in ../applications/ directory )

example:
I want to change twoPhaseEulerFoam solver (from transient-state solver for incompressible, turbulent flow) to mytwoPhaseEulerFoam (steady-state solver for incompressible, turbulent flow).

Regards
Raghavendra

raagh77 · March 17, 2009, 14:50

I mean the what changes should I make in the twoPhaseEulerFoam.C file before using wmake
so that it can be used as a steady state solver rather than transient ..

Daneish · June 3, 2015, 15:41

Hi,
I would like to know if you have succeded in compliling the steady state twophaseeulerfoam, if you did , would you mind directing me to do the same?

Best wishes,
Daneish

roadRunner · June 4, 2015, 09:43

http://www.tfd.chalmers.se/~hani/kur...ngTutorial.pdf

Basically, the minimum is to change the name from "solver.*" to "mySolver.*"
and then change Make/files accordingly.

March 17, 2009, 12:01	creating/compiling own application	#1
raagh77 Member Raghavendra Join Date: Mar 2009 Location: Goteborg, Sweden Posts: 95 Rep Power: 17	Hi all, Just to increase my knowledge in OF am trying to create/compile my own application (in ../applications/ directory ) example: I want to change twoPhaseEulerFoam solver (from transient-state solver for incompressible, turbulent flow) to mytwoPhaseEulerFoam (steady-state solver for incompressible, turbulent flow). Regards Raghavendra

June 3, 2015, 15:41	Progress on the steady state twoPhaseEulerFoam	#3
Daneish New Member despodan Join Date: May 2015 Location: Cottbus Posts: 7 Rep Power: 11	Hi, I would like to know if you have succeded in compliling the steady state twophaseeulerfoam, if you did , would you mind directing me to do the same? Best wishes, Daneish

June 4, 2015, 09:43		#4
roadRunner Member Join Date: Apr 2015 Location: EU Posts: 38 Rep Power: 11	http://www.tfd.chalmers.se/~hani/kur...ngTutorial.pdf Basically, the minimum is to change the name from "solver." to "mySolver." and then change Make/files accordingly. __________________ beep-beep Last edited by roadRunner; June 4, 2015 at 09:43. Reason: h

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
y+ application	vivek.k.yakkundi	FLUENT	2	October 22, 2007 13:17
MPI Application in HPC	wendy	Siemens	0	May 19, 2005 02:50
application of CFD	REKHA	FLUENT	1	January 13, 2005 02:25
Application Example 1	omondi	CFX	1	January 31, 2002 12:15
PER & MIR application	dimitris	Main CFD Forum	1	January 14, 2001 06:10

March 17, 2009, 14:50		#2
raagh77 Member Raghavendra Join Date: Mar 2009 Location: Goteborg, Sweden Posts: 95 Rep Power: 17	I mean the what changes should I make in the twoPhaseEulerFoam.C file before using wmake so that it can be used as a steady state solver rather than transient ..