field read after each Time Step

johanning · December 23, 2019, 15:25

Hello,
I have an ultrasonic field that changes over time. Now I want to see how particles move in this field. I tried to add particles to the previously solved field (with rhoPimpleFoam) with icoUncoupledKinematicParcelFoam. However, the solver calculates the field once and then lets the particles slide through the field with the initial speed over the whole time. But it should always re-read the field, because the field changes over time. Anyone have an idea how exactly I have to rewrite the solver so that the field is not only read in once at the beginning, but after each time step? Unfortunately I am bad in C++.

Thanks a lot

HPE · December 29, 2019, 08:59

please follow up the links below:

December 23, 2019, 15:25	field read after each Time Step	#1
johanning New Member Join Date: Sep 2019 Posts: 14 Rep Power: 7	Hello, I have an ultrasonic field that changes over time. Now I want to see how particles move in this field. I tried to add particles to the previously solved field (with rhoPimpleFoam) with icoUncoupledKinematicParcelFoam. However, the solver calculates the field once and then lets the particles slide through the field with the initial speed over the whole time. But it should always re-read the field, because the field changes over time. Anyone have an idea how exactly I have to rewrite the solver so that the field is not only read in once at the beginning, but after each time step? Unfortunately I am bad in C++. Thanks a lot

December 29, 2019, 08:59		#2
HPE Senior Member Herpes Free Engineer Join Date: Sep 2019 Location: The Home Under The Ground with the Lost Boys Posts: 931 Rep Power: 13	please follow up the links below: __________________ The OpenFOAM community is the biggest contributor to OpenFOAM: User guide/Wiki-1/Wiki-2/Code guide/Code Wiki/Journal Nilsson/Guerrero/Holzinger/Holzmann/Nagy/Santos/Nozaki/Jasak/Primer Governance Bugs/Features: OpenFOAM (ESI-OpenCFD-Trademark) Bugs/Features: FOAM-Extend (Wikki-FSB) Bugs: OpenFOAM.org How to create a MWE New: Forkable OpenFOAM mirror

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
p_rgh initial residual no change with different settings	manuc	OpenFOAM Running, Solving & CFD	3	June 26, 2018 16:53
pressure in incompressible solvers e.g. simpleFoam	chrizzl	OpenFOAM Running, Solving & CFD	13	March 28, 2017 06:49
[mesh manipulation] Importing Multiple Meshes	thomasnwalshiii	OpenFOAM Meshing & Mesh Conversion	18	December 19, 2015 19:57
simpleFoam error - "Floating point exception"	mbcx4jc2	OpenFOAM Running, Solving & CFD	12	August 4, 2015 03:20
AMI interDyMFoam for mixer nu problem	danny123	OpenFOAM Programming & Development	8	September 6, 2013 03:34