 |
 |
 |
|
|
|
[Sponsors] | ||||
Contrl volume /finite element method implemented by OpenFoam |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 24, 2014, 05:00
|
Contrl volume /finite element method implemented by OpenFoam
|
#1 |
|
New Member
Liaoning
Join Date: May 2014
Posts: 12
Rep Power: 12  |
Hello ,
Anyone has ever heared or used the control volume /finite element method(CV/FEM),Maybe this method is different with the traditional finite volume method, I am going to use this method to simulate resin flow in reforcement, which can be used in RTM process to calculate the filling time ,pressure field ,velocity field ,temperature field and so on ,and how can I set the boundary condition in openfoam ,thank you very much~~ |
|
|
|
|
|
| Tags |
| cv/fem, openfoam, resin, resin flow, rtm process |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What is C.V. based finite element method | C-H Kuo | Main CFD Forum | 4 | September 19, 2022 15:06 |
| On the alpha Eqn of VOF method when using Immersed boundary method in OpenFOAM | keepfit | OpenFOAM | 4 | January 31, 2014 15:32 |
| High Element volume ratio | mat_cfd | CFX | 0 | October 17, 2012 03:51 |
| Boundary Element Method = Boundary integral method? | aiqch | Main CFD Forum | 0 | April 3, 2010 17:29 |
| [blockMesh] Axisymmetrical mesh | Rasmus Gjesing (Gjesing) | OpenFOAM Meshing & Mesh Conversion | 10 | April 2, 2007 15:00 |
Linear Mode
