|
[Sponsors] |
March 25, 2012, 16:16 |
mapFields on submesh boundary conditions
|
#1 |
New Member
Per Jørgensen
Join Date: Mar 2012
Posts: 20
Rep Power: 14 |
Hi
I am doing some wind simluation on a urban area. It's a large area with surround areas shaping the wind. First I solve the flow on a coarse grid for the full area Then I refine the mesh and uses mapFields to initialize with the first solution - this works perfect For a further step I wish make a mesh of the central area and use mapFields to set the fields and especially the boundary conditions. What is the correct way to do this? I have tried to specify a fixed value on cuttingPatches but it doesnt produce a solution... Thanks in advance Per |
|
Tags |
boundary condition, mapfields |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Impinging Jet Boundary Conditions | Anindya | Main CFD Forum | 25 | February 27, 2016 12:58 |
OpenFOAM Variable Velocity Boundary Conditions | NickolasPl | OpenFOAM Programming & Development | 2 | May 19, 2011 05:37 |
[Netgen] boundary conditions and mesh exporting | vaina74 | OpenFOAM Meshing & Mesh Conversion | 2 | May 27, 2010 09:38 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |
A problem about setting boundary conditions | lyang | Main CFD Forum | 0 | September 19, 1999 18:29 |