Running FoamX independently by 2 users

rogn · November 6, 2006, 08:19

Hello

I have a problem with FoamX. We are 4 different users running OpenFOAM on a cluster headnode with different logon names. We are not able to run FoamX independently. A single user can open FoamX on the headnode, but as soon as another user attempts to open FoamX a mico exception occurs:

uncaught MICO exception: IDL:omg.org/CORBA/INITIALIZE:1.0 (0, not-completed)

~/OpenFOAM/OpenFOAM-1.3/bin/runFoamXHB: line 127: 23214 Aborted (core dumped) nsd -ORBIIOPAddr $myIOP --ior $FOAMX_CONFIG/ns.ref </dev/null

Can anyone help me to make a workaround, or explain to me, how to set up FoamX, so the different users can work independently in FoamX.

Thank you in advance

Rolf Hansen

mattijs · November 7, 2006, 04:34

Check what your FOAMX_CONFIG is set to. Probably all point to the same central installation so the ns.ref file (which gets written there) gets corrupted.

Just copy the .OpenFOAM-1.3 directory to everyone's home directory. FoamX will detect this and use it instead as its config directory.

rogn · November 8, 2006, 09:00

Hello Mattijs

We all use separate installations of OpenFOAM. (Actually my colleague is running OpenFOAM-1.2, while I'm on the 1.3 version), so our $FOAMX_CONFIG is not pointing toward the same place (I checked it just to be sure!!).

Best regards

Rolf Hansen

mattijs · November 9, 2006, 03:48

Change the port number in $FOAMX_CONFIG/FoamXClient.cfg so they don't conflict?

rogn · November 13, 2006, 05:11

Now it works!!!

Thank you very much

November 6, 2006, 08:19	Hello I have a problem with	#1
rogn New Member Rolf Hansen Join Date: Mar 2009 Posts: 10 Rep Power: 17	Hello I have a problem with FoamX. We are 4 different users running OpenFOAM on a cluster headnode with different logon names. We are not able to run FoamX independently. A single user can open FoamX on the headnode, but as soon as another user attempts to open FoamX a mico exception occurs: uncaught MICO exception: IDL:omg.org/CORBA/INITIALIZE:1.0 (0, not-completed) ~/OpenFOAM/OpenFOAM-1.3/bin/runFoamXHB: line 127: 23214 Aborted (core dumped) nsd -ORBIIOPAddr $myIOP --ior $FOAMX_CONFIG/ns.ref </dev/null Can anyone help me to make a workaround, or explain to me, how to set up FoamX, so the different users can work independently in FoamX. Thank you in advance Rolf Hansen

November 7, 2006, 04:34	Check what your FOAMX_CONFIG i	#2
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	Check what your FOAMX_CONFIG is set to. Probably all point to the same central installation so the ns.ref file (which gets written there) gets corrupted. Just copy the .OpenFOAM-1.3 directory to everyone's home directory. FoamX will detect this and use it instead as its config directory.

November 8, 2006, 09:00	Hello Mattijs We all use se	#3
rogn New Member Rolf Hansen Join Date: Mar 2009 Posts: 10 Rep Power: 17	Hello Mattijs We all use separate installations of OpenFOAM. (Actually my colleague is running OpenFOAM-1.2, while I'm on the 1.3 version), so our $FOAMX_CONFIG is not pointing toward the same place (I checked it just to be sure!!). Best regards Rolf Hansen

November 9, 2006, 03:48	Change the port number in $FOA	#4
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	Change the port number in $FOAMX_CONFIG/FoamXClient.cfg so they don't conflict?

November 13, 2006, 05:11	Now it works!!! Thank you v	#5
rogn New Member Rolf Hansen Join Date: Mar 2009 Posts: 10 Rep Power: 17	Now it works!!! Thank you very much

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Regarding FoamX running Kindly help out	hariya03	OpenFOAM Pre-Processing	0	April 18, 2008 05:26
Problem running FoamX	ianz8802	OpenFOAM Installation	11	March 23, 2007 12:22
Running FoamX	vivekjoshi	OpenFOAM Installation	0	November 5, 2006 17:13
Running icoDyMFoam from FoamX	jdkummer	OpenFOAM Running, Solving & CFD	3	September 13, 2006 05:31
problem in running FoamX in Open FOAM	Gaurav	Main CFD Forum	3	May 10, 2006 06:06