Copy results from one patch to another patch

Frank Rückert · January 18, 2018, 03:08

Hello,

I have two blockMesh meshs and simulations. I want to copy the results from U file of the first simulation to the 0 path of the next simulation. The geometry fit's but the cell number of each patch is different.
Is there an easy solution?

Best regards
Frank

alexeym · January 18, 2018, 06:03

Hi,

Did you already try mapFields utility?

Frank Rückert · January 21, 2018, 12:53

Hello Alexey,

thank you for the help. This was what I am looking for.

P.S.:
I found a good example for mapFields in tutorials directory:
~/openfoam/incompressible/icoFoam/cavity

My regards!

January 18, 2018, 03:08	Copy results from one patch to another patch	#1
Frank Rückert New Member Frank Rückert Join Date: Jan 2018 Posts: 2 Rep Power: 0	Hello, I have two blockMesh meshs and simulations. I want to copy the results from U file of the first simulation to the 0 path of the next simulation. The geometry fit's but the cell number of each patch is different. Is there an easy solution? Best regards Frank

January 21, 2018, 12:53	Thank you!	#3
Frank Rückert New Member Frank Rückert Join Date: Jan 2018 Posts: 2 Rep Power: 0	Hello Alexey, thank you for the help. This was what I am looking for. P.S.: I found a good example for mapFields in tutorials directory: ~/openfoam/incompressible/icoFoam/cavity My regards!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] Wedge patch '*' is not planar	LilumDaru	OpenFOAM Meshing & Mesh Conversion	7	September 18, 2024 06:52
Near wall treatment in k-omega SST	Arnoldinho	OpenFOAM Running, Solving & CFD	38	March 8, 2017 14:48
[OpenFOAM.org] Compile OF 2.3 on Mac OS X .... the patch	gschaider	OpenFOAM Installation	225	August 25, 2015 20:43
Compressor Simulation using rhoPimpleDyMFoam	Jetfire	OpenFOAM Running, Solving & CFD	107	December 9, 2014 14:38
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam)	cfdonline2mohsen	OpenFOAM	3	October 21, 2013 10:28

January 18, 2018, 06:03		#2
alexeym Senior Member Alexey Matveichev Join Date: Aug 2011 Location: Nancy, France Posts: 1,938 Rep Power: 39	Hi, Did you already try mapFields utility?