[daroz]

Hi there,

Basically, the problem I have is a square domain initially filled with air and as the time goes by, water come in through the inlet. The moisture is then carried to the outlet by a moving wall with a constant velocity.
I am using interFoam to solve the problem and when checking out the solution, there is no water coming in.

The boundary conditions for the two phases are:

air:

for the walls is zeroGradient;

outlet {
type fixedValue;
uniform 0;
}
inlet
{
type inletOutlet;
inletValue uniform 0;
value uniform 0;
}
atmosphere
{
type inletOutlet;
inletValue uniform 1;
value uniform 1;
}

water:

for the walls is zeroGradient;

outlet {
type fixedValue;
uniform 0;
}
inlet
{
type inletOutlet;
inletValue uniform 1;
value uniform 1;
}
atmosphere
{
type inletOutlet;
inletValue uniform 0;
value uniform 0;
}

for the pressure field:

for the walls is fixedFluxPressure with value uniform 0;

outlet {
type totalPressure;
p0 uniform 0;
U U;
phi phi;
rho rho;
psi none;
gamma 1;
value uniform 0;
}
inlet
{
type zeroGradient;
}
atmosphere
{
type totalPressure;
p0 uniform 0;
U U;
phi phi;
rho rho;
psi none;
gamma 1;
value uniform 0;
}

for the Velocity file U:

walls... fixedValue uniform (0 0 0)

outlet {
type pressureInletOutletVelocity;
value uniform(0 0 0);
}
inlet
{
type pressureInletOutletVelocity;
value uniform(0 -0.1 0);
}
}
atmosphere
{
type pressureInletOutletVelocity;
value uniform(0 0 0);
}


I have tried to adapt these condition from the damBreak tutorial since I have no experience by using OpenFOAM but, it is not working. I hope you can help me to find out the solution for this problem. Thank you very much.