How to plot motion of a point on a moving boundary?

VigneshSP · July 26, 2020, 09:06

Hi,
I've simulated two bodies free falling into water from a specified height, I want to extract the location of a specific location on the boundary patch and plot the displacement of that specific cell with respect to time. I don't know how i can do it.

Thanks for response

VigneshSP · August 3, 2020, 04:58

I've solved it bye creating a cellzone with the cell I want to track position and getting the position of that cell at each time step using coded function object.

Sachin m · October 7, 2020, 02:52

Can you elaborate how you did it?

July 26, 2020, 09:06	How to plot motion of a point on a moving boundary?	#1
VigneshSP New Member Vignesh S P Join Date: Jul 2018 Location: Coimbatore, Tamil Nadu, India Posts: 17 Rep Power: 8	Hi, I've simulated two bodies free falling into water from a specified height, I want to extract the location of a specific location on the boundary patch and plot the displacement of that specific cell with respect to time. I don't know how i can do it. Thanks for response

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving mesh (dynamic motion) with immersed boundary - foam extend 4.0	abavo	OpenFOAM Running, Solving & CFD	0	August 2, 2018 10:25
Waterwheel shaped turbine inside a pipe simulation problem	mshahed91	CFX	3	January 10, 2015 12:19
Radiation interface	hinca	CFX	15	January 26, 2014 18:11
[snappyHexMesh] snappyHexMesh and cyclic boundaries	Ruli	OpenFOAM Meshing & Mesh Conversion	2	December 9, 2013 07:51
Question about heat transfer coefficient setting for CFX	Anna Tian	CFX	1	June 16, 2013 07:28

August 3, 2020, 04:58		#2
VigneshSP New Member Vignesh S P Join Date: Jul 2018 Location: Coimbatore, Tamil Nadu, India Posts: 17 Rep Power: 8	I've solved it bye creating a cellzone with the cell I want to track position and getting the position of that cell at each time step using coded function object.

October 7, 2020, 02:52		#3
Sachin m Member Sachin Join Date: Aug 2014 Location: India Posts: 84 Rep Power: 12	Can you elaborate how you did it?