OpenFOAM Training Dates by Wikki

hjasak · July 6, 2010, 13:22

Gridcore AB and Wikki announce the following OpenFOAM Trainings:

Intoductory training in Stuttgart on 20 and 21 October 2010

Advanced training in Stuttgart on 20 and 21 October 2010

Introductory training in Gothenburg on 26 and 27 October 2010

Advanced training in Gothenburg on 26 and 27 October 2010

The trainings are organised in collaboration with IBM.

The courses will be delivered by Prof. Hrvoje Jasak and Dr. Henrik Rusche. Material covered will include use of OpenFOAM as a CFD solver, Overview of OpenFOAM library, and OpenFOAM in Use.

For more details and registration, see the Course leaflet or visit Wikki and Gompute web sites.

https://www.gompute.com/web/guest/trainings
https://www.wikki.co.uk
https://www.gompute.se

maddalena · January 18, 2011, 10:05

Are there any course planned for 2011?
Thanks

maddalena

mirko · January 20, 2011, 10:49

Also check out the OF's training schedule. I attended their courses (foundations & advanced). They were quite good.

Mirko

hjasak · January 20, 2011, 15:12

Hello Maddalena,

Yes, there is a set of courses planned, and I am awaiting a final confirmation from our friends at Gompute. I have asked Iago to contact you directly, hopefully this will happen soon (tomorrow?). We will announce it here.

Please drop me a line if you don't hear anything by mid of next week.

I look forward to meeting you again at the training,

Hrvoje

Gompute-Iago · January 21, 2011, 08:08

Dear Maddalena,

The dates and places planned are the next:

3th and 4th of March 2011
Chicago (USA)

16th and 17th of March 2011
Cologne (Germany)

4th and 5th of May 2011
Gothenburg (Sweden)

Please feel free to contact me at iago@se.gompute.com for further information. The official information will be published soon.

Regards

maddalena · February 2, 2011, 06:49

Hi hrv, hi Iago.
I saw on Gompute website that introductory courses are the only planned on the date Iago indicated above. No advanced course? Or are they taken at the same date as happened on 2010 (see the first post of this thread)?

Regards

maddalena

henrik · June 8, 2011, 12:03

Gridcore AB and Wikki announce the following OpenFOAM Trainings:

Intoductory training in Chicago on 27 and 28 July 2011

Advanced training in Gothenburg on 28 and 29 September 2011

Introductory training in Gothenburg on 28 and 29 September 2011

The trainings are organised in collaboration with IBM.

The courses will be delivered by Prof. Hrvoje Jasak and Dr. Henrik Rusche. Material covered will include use of OpenFOAM as a CFD solver, Overview of OpenFOAM library, and OpenFOAM in Use.

For more details and registration, see the Course Leaflet or visit Wikki and Gompute web sites.

https://www.gompute.com/web/guest/trainings
https://www.wikki.co.uk
https://www.gompute.se

henrik · November 7, 2011, 13:56

Gridcore AB and Wikki announce the following OpenFOAM Trainings:

Intoductory training in Mainz on 23 and 24 November 2011

Advanced training in Mainz on 23 and 24 November 2011

For more details and registration, see the Course Leaflet or visit Wikki and Gompute web sites.

https://www.gompute.com/web/guest/trainings
https://www.wikki.co.uk
https://www.gompute.se

henrik · September 7, 2013, 19:39

Wikki has one additional seat available for an

OpenFOAM® Introductory Training in Burghausen, Germany on 18 and 19 September 2013

The agenda of the course is:

1) OpenFOAM as a CFD solver
· Mesh generation, conversion and set-up: importing Fluent and STAR-CD cases.
· Material properties, initial and boundary conditions.
· Running the solver, including massively parallel computations.
· Data analysis, sampling, graphing and postprocessing.
· Hands-on examples.

2) Overview of OpenFOAM library
· Basics of C++ programming language (with exercises).
· OpenFOAM library organization.
· Physical modeling capabilities.
· Top-level solver organization: physics, controls, data analysis.
· Finite Volume Discretization: theoretical base of OpenFOAM.
· Example of using OpenFOAM capabilities in a custom solver.

3) OpenFOAM in Use
· Extending OpenFOAM capabilities.
· Customized data manipulation.
· On-the-fly post-processing.
· Implementing a new boundary condition.
· Adding a new transport equation.
· Wmake build system.
· Hands-on examples.
· Parallel processing: theoretical basis, data decomposition and reconstruction, impact on coding.

4) Open Forum & Clinic: Questions and Examples including bring your own problem.

The price of the course is 1200 Euros. For more details and registration, please contact Henrik Rusche

Maimouna · September 22, 2014, 08:11

Dear All,

I'm looking for OpenFOAM training course in the UK during the next period of time. If any provide me all details. I'm really need such course in OpenFOAM.

Kind regards

July 6, 2010, 13:22	OpenFOAM Training Dates by Wikki	#1
hjasak Senior Member Hrvoje Jasak Join Date: Mar 2009 Location: London, England Posts: 1,907 Rep Power: 33	Gridcore AB and Wikki announce the following OpenFOAM Trainings: Intoductory training in Stuttgart on 20 and 21 October 2010 Advanced training in Stuttgart on 20 and 21 October 2010 Introductory training in Gothenburg on 26 and 27 October 2010 Advanced training in Gothenburg on 26 and 27 October 2010 The trainings are organised in collaboration with IBM. The courses will be delivered by Prof. Hrvoje Jasak and Dr. Henrik Rusche. Material covered will include use of OpenFOAM as a CFD solver, Overview of OpenFOAM library, and OpenFOAM in Use. For more details and registration, see the Course leaflet or visit Wikki and Gompute web sites. https://www.gompute.com/web/guest/trainings https://www.wikki.co.uk https://www.gompute.se __________________ Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk

January 20, 2011, 15:12		#4
hjasak Senior Member Hrvoje Jasak Join Date: Mar 2009 Location: London, England Posts: 1,907 Rep Power: 33	Hello Maddalena, Yes, there is a set of courses planned, and I am awaiting a final confirmation from our friends at Gompute. I have asked Iago to contact you directly, hopefully this will happen soon (tomorrow?). We will announce it here. Please drop me a line if you don't hear anything by mid of next week. I look forward to meeting you again at the training, Hrvoje __________________ Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk

January 21, 2011, 08:08	OpenFOAM courses 2011	#5
Gompute-Iago New Member Iago Join Date: Jan 2011 Posts: 1 Rep Power: 0	Dear Maddalena, The dates and places planned are the next: 3th and 4th of March 2011 Chicago (USA) 16th and 17th of March 2011 Cologne (Germany) 4th and 5th of May 2011 Gothenburg (Sweden) Please feel free to contact me at iago@se.gompute.com for further information. The official information will be published soon. Regards

September 7, 2013, 19:39		#9
henrik Senior Member Henrik Rusche Join Date: Mar 2009 Location: Wernigerode, Sachsen-Anhalt, Germany Posts: 281 Rep Power: 18	Wikki has one additional seat available for an OpenFOAM® Introductory Training in Burghausen, Germany on 18 and 19 September 2013 The agenda of the course is: 1) OpenFOAM as a CFD solver · Mesh generation, conversion and set-up: importing Fluent and STAR-CD cases. · Material properties, initial and boundary conditions. · Running the solver, including massively parallel computations. · Data analysis, sampling, graphing and postprocessing. · Hands-on examples. 2) Overview of OpenFOAM library · Basics of C++ programming language (with exercises). · OpenFOAM library organization. · Physical modeling capabilities. · Top-level solver organization: physics, controls, data analysis. · Finite Volume Discretization: theoretical base of OpenFOAM. · Example of using OpenFOAM capabilities in a custom solver. 3) OpenFOAM in Use · Extending OpenFOAM capabilities. · Customized data manipulation. · On-the-fly post-processing. · Implementing a new boundary condition. · Adding a new transport equation. · Wmake build system. · Hands-on examples. · Parallel processing: theoretical basis, data decomposition and reconstruction, impact on coding. 4) Open Forum & Clinic: Questions and Examples including bring your own problem. The price of the course is 1200 Euros. For more details and registration, please contact Henrik Rusche Last edited by henrik; September 9, 2013 at 04:35.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM Training Courses in Germany	hjasak	OpenFOAM Announcements from Other Sources	0	July 23, 2009 20:34
OpenFOAM Training Courses in US, 2009	OpenFOAM discussion board administrator	OpenFOAM Announcements from ESI-OpenCFD	0	October 10, 2008 11:53
OpenFOAM Training in Europe and USA	hjasak	OpenFOAM	0	August 8, 2008 06:33
OpenFOAM Training and Workshop Zagreb 2628Jan2006	hjasak	OpenFOAM	1	February 2, 2006 22:07
OpenFOAM Training and Workshop	Hrvoje Jasak	Main CFD Forum	0	October 7, 2005 08:14

January 18, 2011, 10:05		#2
maddalena Senior Member maddalena Join Date: Mar 2009 Posts: 436 Rep Power: 23	Are there any course planned for 2011? Thanks maddalena

January 20, 2011, 10:49		#3
mirko Senior Member Mirko Vukovic Join Date: Mar 2009 Posts: 159 Rep Power: 17	Also check out the OF's training schedule. I attended their courses (foundations & advanced). They were quite good. Mirko

February 2, 2011, 06:49		#6
maddalena Senior Member maddalena Join Date: Mar 2009 Posts: 436 Rep Power: 23	Hi hrv, hi Iago. I saw on Gompute website that introductory courses are the only planned on the date Iago indicated above. No advanced course? Or are they taken at the same date as happened on 2010 (see the first post of this thread)? Regards maddalena

June 8, 2011, 12:03		#7
henrik Senior Member Henrik Rusche Join Date: Mar 2009 Location: Wernigerode, Sachsen-Anhalt, Germany Posts: 281 Rep Power: 18	Gridcore AB and Wikki announce the following OpenFOAM Trainings: Intoductory training in Chicago on 27 and 28 July 2011 Advanced training in Gothenburg on 28 and 29 September 2011 Introductory training in Gothenburg on 28 and 29 September 2011 The trainings are organised in collaboration with IBM. The courses will be delivered by Prof. Hrvoje Jasak and Dr. Henrik Rusche. Material covered will include use of OpenFOAM as a CFD solver, Overview of OpenFOAM library, and OpenFOAM in Use. For more details and registration, see the Course Leaflet or visit Wikki and Gompute web sites. https://www.gompute.com/web/guest/trainings https://www.wikki.co.uk https://www.gompute.se

November 7, 2011, 13:56		#8
henrik Senior Member Henrik Rusche Join Date: Mar 2009 Location: Wernigerode, Sachsen-Anhalt, Germany Posts: 281 Rep Power: 18	Gridcore AB and Wikki announce the following OpenFOAM Trainings: Intoductory training in Mainz on 23 and 24 November 2011 Advanced training in Mainz on 23 and 24 November 2011 For more details and registration, see the Course Leaflet or visit Wikki and Gompute web sites. https://www.gompute.com/web/guest/trainings https://www.wikki.co.uk https://www.gompute.se

September 22, 2014, 08:11		#10
Maimouna Senior Member ok Join Date: Oct 2013 Posts: 346 Rep Power: 14	Dear All, I'm looking for OpenFOAM training course in the UK during the next period of time. If any provide me all details. I'm really need such course in OpenFOAM. Kind regards