|
[Sponsors] |
Workshop - Digital Twins for Energy Transition: Batteries, Fuel-Cells, Electrolyzers |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 5, 2024, 05:36 |
Workshop - Digital Twins for Energy Transition: Batteries, Fuel-Cells, Electrolyzers
|
#1 |
Senior Member
|
Invitation to the Workshop 𝗗𝗶𝗴𝗶𝘁𝗮𝗹 𝗧𝘄𝗶𝗻𝘀 𝗳𝗼𝗿 𝗘𝗻𝗲𝗿𝗴𝘆 𝗧𝗿𝗮𝗻𝘀𝗶𝘁𝗶𝗼𝗻: 𝗠𝗼𝗱𝗲𝗹𝗶𝗻𝗴 𝗘𝗹𝗲𝗰𝘁𝗿𝗼𝗰𝗵𝗲𝗺𝗶𝗰𝗮𝗹 𝗦𝘆𝘀𝘁𝗲𝗺𝘀 🌍🔋
Join us in Darmstadt for an in-depth workshop on the role of Digital Twins in the Energy Transition, focusing on the modeling and simulation of electrochemical systems using Open-Source methods. 📅 Date: October 23 - 25, 2024 📍 Location: IANUS Simulation GmbH, Technologie- und Innovationszentrum Darmstadt, Robert-Bosch-Straße 7, 64293 Darmstadt, Germany 🔗 Register now: https://lnkd.in/ex3dJecc 🔗 Agenda: https://bit.ly/batteryFuelcellWorkshop 𝗪𝗵𝗮𝘁 𝘁𝗼 𝗘𝘅𝗽𝗲𝗰𝘁: 👉 We dive into the theoretical foundations of electrochemical processes essential for Green H2 Production, H2 Usage, and Energy Storage. 👉 We explore special topics like Electrolysis (PEM, SO, alkaline), Fuel Cells (PEM, SO), and Li-Ion Batteries. 👉 We engage with each other in discussions to bridge gaps and catalyze innovation. 𝗪𝗵𝗼 𝗦𝗵𝗼𝘂𝗹𝗱 𝗔𝘁𝘁𝗲𝗻𝗱? This course is tailored for practicing engineers and R&D researchers using Open-Source software like OpenFOAM or MOOSE in the simulation of energy systems. Take advantage of this unique opportunity to expand your knowledge, network with peers, and stay at the forefront of technological advancements in the energy sector. 🌟 𝗗𝗼𝗻’𝘁 𝗺𝗶𝘀𝘀 𝗼𝘂𝘁 𝗼𝗻 𝘁𝗵𝗲 𝗰𝗵𝗮𝗻𝗰𝗲 𝘁𝗼 𝗷𝗼𝗶𝗻 𝗶𝗻 𝘁𝗵𝗶𝘀 𝘄𝗼𝗿𝗸𝘀𝗵𝗼𝗽 𝗼𝗻 𝘀𝗶𝗺𝘂𝗹𝗮𝘁𝗶𝗼𝗻 𝘁𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝘆 𝗳𝗼𝗿 𝗲𝗻𝗲𝗿𝗴𝘆 𝘁𝗿𝗮𝗻𝘀𝗶𝘁𝗶𝗼𝗻. 𝗦𝗲𝗲 𝘆𝗼𝘂 𝗶𝗻 𝗗𝗮𝗿𝗺𝘀𝘁𝗮𝗱𝘁!
__________________
Holger Marschall web: http://www.holger-marschall.info mail: holgermarschall@yahoo.de |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] snappyHexMesh does not work | Siassei | OpenFOAM Meshing & Mesh Conversion | 8 | September 28, 2023 05:01 |
flow over cylinder in openFoam | saeed jamshidi | OpenFOAM Pre-Processing | 3 | August 11, 2023 16:16 |
Ncrit for a glider Xfoil. How to use it. GPT4 answer | AlanMattanó | Main CFD Forum | 0 | April 10, 2023 13:16 |
[snappyHexMesh] snappyHexMesh stuck when snap is turned on | yukuns | OpenFOAM Meshing & Mesh Conversion | 3 | February 2, 2021 14:05 |
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell | Arman_N | OpenFOAM Meshing & Mesh Conversion | 1 | May 20, 2019 18:16 |