CFD in Naval Hydrodynamics, Off-Shore and Wave Modelling with OpenFOAM

hjasak · April 26, 2016, 06:17

Wikki Ltd. is pleased to announce an industry focused User Day dedicated to

The User day will be held on 23 May 2015 in London.

The objective of the User Day is to present the capabilities of the Naval Hydro Pack produced by Wikki. The Naval Hydro Pack extends the capabilities of foam-extend, a community driven fork of OpenFOAM® in naval hydrodynamics CFD applications such as wave and current loading on fixed and floating ship hulls and off-shore structures, coastal wave dynamics and wave scour simulations.

Focus will be given to the presentation of validation and verification results, user testimonials and mesh generation issues for a range of naval hydrodynamics problems. The event includes the reports from

Offshore Technology Conference (OTC), 2-5 May 2016
SHOPERA: 3rd Public Workshop 13-15th April 2016
Tokyo 2015: A Workshop on CFD in Ship Hydrodynamics, 2-4 December 2015
TULCS EU FP 7 Project: Tools for Ultra Large Container Ships
In-house validation and verification

and examples of the use of FOAM naval hydrodynamics tools over a range of validation and design studies:

1) Naval hydrodynamics with FOAM: overview of physical modelling

2) Naval hydrodynamics simulations
Sloshing, slamming and water wave impact on structures
Green water simulations
Steady resistance simulations of ship hulls
Sinkage and trim simulations
Drift angle simulations
Forced oscillation simulations and constrained motion cases (heave and roll damping)

3) Meshing with Pointwise

4) Wave modelling in free surface flows
Incoming wave conditions: regular and irregular waves
Coupling of incoming waves with CFD flow simulations: relaxation zone approach
Implementation and validation of the SWENSE solver for seakeeping simulations
Sea-keeping simulations for ship hulls

5) Irregular sea states and freak wave modelling
Wave packet focusing techniques and irregular and 2-D sea state spectra
Higher Order Spectrum solver in FOAM
Generation of freak waves
Freak wave impact on fixed and floating objects

6) Constrained objects and maneuvering simulations:
Interface to external wave modelling and mooring system solvers
Global performance simulations for spar and semi-sub platforms
Modelling of ship propulsors
Simulation of free sailing and prescribed trajectory

7) Compressibility effects in free surface flows

The Workshop shall be followed by an open floor discussion of results and further physical modelling in free surface flows for off-shore and naval hydrodynamics. Hands-on trial of the Naval Hydro Pack will be available during the User Day

During the User Day, hands-on session with the Naval Hydro pack shall be available.

Invited speakers

Prof. Hrvoje Jasak, Wikki Ltd: presenting the Naval Hydro pack produced by Wikki
Dr. Steven Downie, Arup: presenting experiences of the use of OpenFOAM® in off-shore simulations
Mr. Vuko Vukcevic, Uni Zagreb: presenting seakeeping and added wave resistance results and implementation of the SWENSE solver
Mr. John Stone, Pointwise: High quality meshing of ship hulls

Agenda

09.00 - 09.30 Welcome and Registration
09.30 - 10.00 Introduction to FOAM in naval hydrodynamics and the Naval Hydro Pack by Wikki
10.00 - 10.30 Naval hydrodynamics simulations
10.30 - 11.00 Coffee and refreshments
11.00 - 11.30 Meshing with Pointwise
11.30 - 12.15 Wave modelling in free surface flows
12.15 - 13.00 Lunch and poster session
13.00 - 13.30 User testimonial: Arup
13.30 - 14.15 Naval hydrodynamics simulations: Tokyo and SHOPERA Validation reports
14.15 - 15.00 Hands-on software demo: Naval Hydro Pack
15.00 - 15.30 Afternoon tea
15.30 - 16.15 Irregular sea states, Higher Order Spectrum and freak wave modelling
16.15 - 17.00 Advanced topics and maneuvering simulations
17.00 - 17.30 Open discussion
17.30 Close

Date and Location:

The event will take place on Monday 23 May 2016 between 9.00 and 17.30 h at

Southbank House
Black Prince Road
London SE1 7SJ
United Kingdom

The registration fee for the workshop is GBP 100 and advance registration is required. For registration and further details please contact events@wikki.co.uk

Web page: http://wikki.co.uk/events/navalHydroEvent

OpenFOAM® is a registered trade mark of OpenCFD Limited, producer and distributor of the OpenFOAM software. This offering is not approved or endorsed by OpenCFD Limited, producer and distributor of the OpenFOAM software and owner of the OpenFOAM® and OpenCFD® trade marks.

JFM · February 12, 2017, 22:31

Good day

Could someone please provide details on how to access/obtain Naval Hydro Pack? I have installed foam-extend 4.0 (ubuntu 16.04) and OpenFOAM 4.1.

Regards
JFM

hjasak · February 13, 2017, 05:59

Hi,

The Naval Hydro git repo is available to customers with the active support contract with Wikki. Please contact me if you need more info.

Hrv

April 26, 2016, 06:17	CFD in Naval Hydrodynamics, Off-Shore and Wave Modelling with OpenFOAM	#1
hjasak Senior Member Hrvoje Jasak Join Date: Mar 2009 Location: London, England Posts: 1,907 Rep Power: 33	Wikki Ltd. is pleased to announce an industry focused User Day dedicated to CFD in Naval Hydrodynamics, Off-Shore and Wave Modelling with OpenFOAM The User day will be held on 23 May 2015 in London. The objective of the User Day is to present the capabilities of the Naval Hydro Pack produced by Wikki. The Naval Hydro Pack extends the capabilities of foam-extend, a community driven fork of OpenFOAM® in naval hydrodynamics CFD applications such as wave and current loading on fixed and floating ship hulls and off-shore structures, coastal wave dynamics and wave scour simulations. Focus will be given to the presentation of validation and verification results, user testimonials and mesh generation issues for a range of naval hydrodynamics problems. The event includes the reports from Offshore Technology Conference (OTC), 2-5 May 2016 SHOPERA: 3rd Public Workshop 13-15th April 2016 Tokyo 2015: A Workshop on CFD in Ship Hydrodynamics, 2-4 December 2015 TULCS EU FP 7 Project: Tools for Ultra Large Container Ships In-house validation and verification and examples of the use of FOAM naval hydrodynamics tools over a range of validation and design studies: 1) Naval hydrodynamics with FOAM: overview of physical modelling 2) Naval hydrodynamics simulations Sloshing, slamming and water wave impact on structures Green water simulations Steady resistance simulations of ship hulls Sinkage and trim simulations Drift angle simulations Forced oscillation simulations and constrained motion cases (heave and roll damping) 3) Meshing with Pointwise 4) Wave modelling in free surface flows Incoming wave conditions: regular and irregular waves Coupling of incoming waves with CFD flow simulations: relaxation zone approach Implementation and validation of the SWENSE solver for seakeeping simulations Sea-keeping simulations for ship hulls 5) Irregular sea states and freak wave modelling Wave packet focusing techniques and irregular and 2-D sea state spectra Higher Order Spectrum solver in FOAM Generation of freak waves Freak wave impact on fixed and floating objects 6) Constrained objects and maneuvering simulations: Interface to external wave modelling and mooring system solvers Global performance simulations for spar and semi-sub platforms Modelling of ship propulsors Simulation of free sailing and prescribed trajectory 7) Compressibility effects in free surface flows The Workshop shall be followed by an open floor discussion of results and further physical modelling in free surface flows for off-shore and naval hydrodynamics. Hands-on trial of the Naval Hydro Pack will be available during the User Day During the User Day, hands-on session with the Naval Hydro pack shall be available. Invited speakers Prof. Hrvoje Jasak, Wikki Ltd: presenting the Naval Hydro pack produced by Wikki Dr. Steven Downie, Arup: presenting experiences of the use of OpenFOAM® in off-shore simulations Mr. Vuko Vukcevic, Uni Zagreb: presenting seakeeping and added wave resistance results and implementation of the SWENSE solver Mr. John Stone, Pointwise: High quality meshing of ship hulls Agenda 09.00 - 09.30 Welcome and Registration 09.30 - 10.00 Introduction to FOAM in naval hydrodynamics and the Naval Hydro Pack by Wikki 10.00 - 10.30 Naval hydrodynamics simulations 10.30 - 11.00 Coffee and refreshments 11.00 - 11.30 Meshing with Pointwise 11.30 - 12.15 Wave modelling in free surface flows 12.15 - 13.00 Lunch and poster session 13.00 - 13.30 User testimonial: Arup 13.30 - 14.15 Naval hydrodynamics simulations: Tokyo and SHOPERA Validation reports 14.15 - 15.00 Hands-on software demo: Naval Hydro Pack 15.00 - 15.30 Afternoon tea 15.30 - 16.15 Irregular sea states, Higher Order Spectrum and freak wave modelling 16.15 - 17.00 Advanced topics and maneuvering simulations 17.00 - 17.30 Open discussion 17.30 Close Date and Location: The event will take place on Monday 23 May 2016 between 9.00 and 17.30 h at Southbank House Black Prince Road London SE1 7SJ United Kingdom The registration fee for the workshop is GBP 100 and advance registration is required. For registration and further details please contact events@wikki.co.uk Web page: http://wikki.co.uk/events/navalHydroEvent OpenFOAM® is a registered trade mark of OpenCFD Limited, producer and distributor of the OpenFOAM software. This offering is not approved or endorsed by OpenCFD Limited, producer and distributor of the OpenFOAM software and owner of the OpenFOAM® and OpenCFD® trade marks. __________________ Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk

February 12, 2017, 22:31	Accessing Naval Hydro Pack	#2
JFM Member John Anonymous Join Date: Jan 2011 Location: Melbourne Australia Posts: 37 Rep Power: 15	Good day Could someone please provide details on how to access/obtain Naval Hydro Pack? I have installed foam-extend 4.0 (ubuntu 16.04) and OpenFOAM 4.1. Regards JFM

February 13, 2017, 05:59		#3
hjasak Senior Member Hrvoje Jasak Join Date: Mar 2009 Location: London, England Posts: 1,907 Rep Power: 33	Hi, The Naval Hydro git repo is available to customers with the active support contract with Wikki. Please contact me if you need more info. Hrv __________________ Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk