OpenFOAM Meshing & Mesh Conversion

User Name Remember Me Password

Read this first: How to ask a question on the forums

Page 82 of 149 « First < 32 72 80 81 82 83 84 92 132 > Last »

Threads in Forum : OpenFOAM Meshing & Mesh Conversion

Forum Tools

Search this Forum

		Rating Thread / Thread Starter	Last Post	Replies	Views
		Sticky: [snappyHexMesh] About snappyHexMesh ( 1 2 3) wyldckat	August 10, 2023 04:22 by H_SheikhShoaie	41	16,484
		Sticky: [blockMesh] About blockMesh wyldckat	October 1, 2022 00:10 by yzj	5	9,462
		Sticky: [Commercial meshers] About the Commercial and Closed Source Meshers discussed here wyldckat	July 22, 2020 23:09 by fumiya	3	8,733
		Sticky: [CAD formats] Creating waterproof STL using snappyHexMesh or salome ( 1 2 3) Tobi	May 13, 2020 07:01 by otaolafr	58	35,106
		Sticky: About the Open Source Meshers discussed here wyldckat	June 5, 2019 05:52 by Enrico Segre	3	11,390
		Sticky: Map of this Meshing (sub-)Forum wyldckat	April 27, 2019 10:33 by wyldckat	0	5,396
		Sticky: cfMesh: Please read this wyldckat	December 30, 2017 20:11 by wyldckat	0	7,702
		[Commercial meshers] how to convert the .db (ansys database) file to openfoam? stickjohnson	December 4, 2015 16:08 by arpitpatel	2	2,698
		[surface handling] surfaceFeatureExtract not working well manoj_nav	December 4, 2015 05:35 by manoj_nav	1	1,301
		[snappyHexMesh] Adding Layer Problem talatgokcer	December 4, 2015 02:23 by talatgokcer	0	1,215
		[Other] Dynamic mesh particles mikekaff	December 1, 2015 06:57 by mikekaff	0	1,176
		[Commercial meshers] Fluent3DMeshtoFoam ( 1 2) r2d2	November 30, 2015 13:22 by WernerW	36	7,045
		[mesh manipulation] StitchMesh sigFpe / bad point liquidspoon	November 29, 2015 15:19 by liquidspoon	2	1,733
		[snappyHexMesh] snappyHexMesh: extra domains domain1 domain2 ... appear skuznet	November 29, 2015 07:43 by wyldckat	3	2,696
		[snappyHexMesh] SnappyHexMesh: .eMesh file format shantanukale	November 26, 2015 16:15 by nacholarrabide	10	4,764
		[Technical] Problems with mesh processing STutexas	November 26, 2015 02:12 by STutexas	3	1,342
		[Other] vtk mesh or Abaqus mesh to OpenFOAM ( 1 2) bigphil	November 23, 2015 18:31 by bigphil	27	17,438
		[snappyHexMesh] Inlet/Outlet Faces are not meshed correctly RobertSoeldner	November 23, 2015 11:23 by RobertSoeldner	0	819
		[Gmsh] Gmsh physical line and .msh Chacha	November 23, 2015 09:10 by alexeym	1	3,903
		[Other] Confused about the block definition ziming zhu	November 23, 2015 08:27 by cutter	1	1,712
		[Other] Problems with mesh processing STutexas	November 23, 2015 01:56 by STutexas	3	1,172
		[Commercial meshers] Problem encountered in converting Fluent mesh to OpenFOAM Mesh sathya123	November 22, 2015 04:22 by sathya123	2	1,396
		[snappyHexMesh] Problem handling with subdictionary in SnappyHexMesh Lorenzo92	November 21, 2015 14:57 by Lorenzo92	0	1,334
		[blockMesh] blockMesh - 2D Harak	November 21, 2015 06:20 by akidess	3	2,537
		[snappyHexMesh] snappyHexMesh - backward facing step hcl734	November 20, 2015 10:57 by hcl734	4	2,466
		[blockMesh] Non-physical solution with cylindrical 2D blockMesh with triangle faces A_Pete	November 20, 2015 05:38 by A_Pete	0	1,267
		[snappyHexMesh] Snappy-hex mesh results ernarasimman	November 19, 2015 19:32 by wyldckat	3	1,795
		[snappyHexMesh] Refinement at wrong stage in SnappyHexMesh james.conger	November 18, 2015 21:03 by james.conger	1	925
		[Gmsh] Axisymmetric model from STEP in GMSH eric.m.tridas	November 18, 2015 06:24 by PERACHISELVI	7	5,598
		[mesh manipulation] allow only primitive cell shapes in refineMesh ganeshv	November 17, 2015 11:17 by cutter	1	1,306
		[blockMesh] Where can we find more details about blockMesh's algoritms? usv001	November 17, 2015 08:45 by kalle	4	1,173
		[snappyHexMesh] snappyHexMesh runs endless - I need general advise TeresaT	November 17, 2015 03:50 by TeresaT	5	1,574
		[blockMesh] Cannot view arc edge in ParaView erlendg	November 14, 2015 12:22 by iper88	5	2,502
		[blockMesh] How to merge blocks? Match, merge or stitch? gerritgroot	November 13, 2015 21:59 by gerritgroot	0	2,807
		[Technical] Order of points in a boundary patch camille.yvin	November 11, 2015 11:31 by nitishanand1989	8	12,349
		[blockMesh] Buice 2D asymetric diffuser canopus	November 11, 2015 09:59 by linnemann	2	1,808
		[Other] Is there a native way to produce non-hex meshes? And what are their uses? phandy	November 10, 2015 11:16 by phandy	0	846
		[snappyHexMesh] Snappy creates a bumpy surface swin-joe	November 9, 2015 07:20 by swin-joe	5	1,158
		[snappyHexMesh] On which patches to set BC's for snappyHexMesh ? Talder	November 8, 2015 19:25 by Talder	0	1,203
		[blockMesh] Unwanted internal Mesh in OpenFOAM, using blockMesh nitishanand1989	November 7, 2015 13:43 by nitishanand1989	1	1,001
		[snappyHexMesh] Problem in layer addition at complex/bend shapes vineet_bhola	November 6, 2015 10:48 by vineet_bhola	0	924
		[mesh manipulation] Rotate a mesh fabrizio	November 6, 2015 06:20 by mar001	4	4,739
		[blockMesh] circular plate mesh with cyclic blackbow	November 6, 2015 06:05 by blackbow	0	1,368
		[snappyHexMesh] SnappyHexMesh in Parallel problem swifty	November 6, 2015 05:40 by jaydeepKhajure	10	6,253
		[Commercial meshers] mesh conversion from ansys mesher to openfoam Dusan1224	November 5, 2015 04:41 by Dusan1224	2	1,315
		[blockMesh] Principle/maths behind blockMesh usv001	November 3, 2015 12:12 by usv001	0	1,107
		[Other] How to use finite area method in official OpenFOAM 2.2.0? Detian Liu	November 3, 2015 04:04 by sarbi	4	3,145

Read this first: How to ask a question on the forums

Page 82 of 149 « First < 32 72 80 81 82 83 84 92 132 > Last »

Display Options

Showing threads 3241 to 3280 of 5932

Sorted By Thread Title Last Post Time Thread Start Time Number of Replies Number of Views Thread Starter Thread Rating Sort Order Ascending Descending From The Last Day Last 2 Days Last Week Last 10 Days Last 2 Weeks Last Month Last 45 Days Last 2 Months Last 75 Days Last 100 Days Last Year Beginning Prefix (any prefix) (no prefix) [blockMesh] [CAD formats] [CGNS] [Commercial meshers] [foamyMesh] [Gmsh] [mesh manipulation] [Netgen] [Salome] [snappyHexMesh] [surface handling] [Technical] [Other]

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules