OpenFOAM Meshing & Mesh Conversion

User Name Remember Me Password

Read this first: How to ask a question on the forums

Page 13 of 149 « First < 3 11 12 13 14 15 23 63 113 > Last »

Threads in Forum : OpenFOAM Meshing & Mesh Conversion

Forum Tools

Search this Forum

		Rating Thread / Thread Starter	Last Post	Replies	Views
		Sticky: [snappyHexMesh] About snappyHexMesh ( 1 2 3) wyldckat	August 10, 2023 04:22 by H_SheikhShoaie	41	16,481
		Sticky: [blockMesh] About blockMesh wyldckat	October 1, 2022 00:10 by yzj	5	9,460
		Sticky: [Commercial meshers] About the Commercial and Closed Source Meshers discussed here wyldckat	July 22, 2020 23:09 by fumiya	3	8,733
		Sticky: [CAD formats] Creating waterproof STL using snappyHexMesh or salome ( 1 2 3) Tobi	May 13, 2020 07:01 by otaolafr	58	35,101
		Sticky: About the Open Source Meshers discussed here wyldckat	June 5, 2019 05:52 by Enrico Segre	3	11,389
		Sticky: Map of this Meshing (sub-)Forum wyldckat	April 27, 2019 10:33 by wyldckat	0	5,395
		Sticky: cfMesh: Please read this wyldckat	December 30, 2017 20:11 by wyldckat	0	7,700
		[Gmsh] Graded Mesh on radial direction ilgoran	March 24, 2023 09:59 by ilgoran	0	559
		[Other] Difference btw dynamicRefineFVMesh vs polyTopoChange songyi719	March 23, 2023 03:37 by songyi719	2	586
		[surface handling] Moving boundaries with mesh morphing tusin111	March 23, 2023 03:33 by tusin111	0	486
		[blockMesh] MeshID Removal OpenFoam emadsiadati	March 22, 2023 12:27 by emadsiadati	0	480
		[snappyHexMesh] SnapProblem in MultiRegion case jav.kunst	March 21, 2023 09:39 by Hr_kules	4	1,205
		[snappyHexMesh] How can I reduce RAM consumption of snappyHexMesh? songyi719	March 20, 2023 12:09 by cibanez	2	823
		[Commercial meshers] Problems in meshing 2D axisymmetric nozzle wedge with Salome kim4545	March 20, 2023 12:05 by K-al-Eps-o	1	1,147
		[mesh manipulation] Mesh Generation and Mesh Movement for an Internal Combustion Engine Matheus Pereira	March 20, 2023 08:45 by Matheus Pereira	0	384
		[blockMesh] Sphere mesh with blockMesh - weird cells TheMadHungarian	March 18, 2023 07:20 by mAlletto	9	2,075
		[Gmsh] How can I fix mesh size in GMSH? nazmulislam	March 17, 2023 03:08 by nazmulislam	4	545
		[snappyHexMesh] Surface feature dict and layer addition Hr_kules	March 16, 2023 16:36 by Hr_kules	2	701
		[blockMesh] Flow Over A Cylinder Mesh amarzooq	March 16, 2023 11:37 by amarzooq	0	562
		[blockMesh] Segmentation fault during blockMesh baldbrain	March 14, 2023 14:51 by baldbrain	0	567
		[snappyHexMesh] Snapping issue at cell level change DGT	March 14, 2023 08:13 by AtoHM	3	475
		[snappyHexMesh] not capturing feature edges cbe	March 13, 2023 10:49 by cbe	0	464
		[mesh manipulation] How to remove an extra domain in split Mesh Region? sunagra27	March 9, 2023 12:51 by Atefeh T	1	1,086
		[snappyHexMesh] SnappyHexMesh Error: malloc(): invalid next size LeiFluidDynamics	March 8, 2023 10:29 by alabardati1918	1	2,048
		[Gmsh] gmshToFoam killed without message lg331	March 7, 2023 03:38 by 958490203@qq.com	2	954
		[snappyHexMesh] Reducing STL size for snappyHexMesh MarcusAng	March 6, 2023 04:45 by rmaries	2	622
		[blockMesh] Inward-facing faces error COSMICBUDDHA	March 6, 2023 01:02 by COSMICBUDDHA	1	803
		[snappyHexMesh] Bad stl surface fitting DGT	March 1, 2023 02:35 by DGT	2	414
		[Gmsh] Convert pure Tetrahedra Mesh to pure Hexahedra Mesh (e.g. by splitting) K.C.	February 28, 2023 03:22 by AtoHM	5	1,930
		[blockMesh] Cannot convert Ansys .msh to OpenFoam Aarib	February 25, 2023 17:01 by Aarib	0	439
		[mesh manipulation] Does extrudeMesh affect mesh quality in non extruded cells? Blanco	February 25, 2023 09:19 by zhutaihang	3	1,843
		[snappyHexMesh] How to deal with problems in grid merging? Banbor	February 25, 2023 03:22 by Banbor	0	357
		[blockMesh] blockMesh Error "bad points" in MergePatchPairs Borja	February 22, 2023 15:22 by Borja	0	472
		[Other] oversetMesh : toposetDict for 3 or more oversetMesh that moves?? kimou	February 22, 2023 11:04 by kimou	0	459
		[snappyHexMesh] stl file not showing after snappyhexmesh cfdnsh	February 22, 2023 10:21 by cfdnsh	0	388
		[Salome] problem with work flow: freeCAD => Salome => cfMesh mmohaqeqf	February 22, 2023 05:00 by hogglife	3	2,161
		[mesh manipulation] I Updated the `modifyPatches` utility for OpenFOAM-v2206 reverseila	February 21, 2023 08:25 by reverseila	0	567
		[snappyHexMesh] Surface feature extract problems Will_amos	February 21, 2023 08:20 by Will_amos	0	568
		[snappyHexMesh] Multiregion Snappy Hex Mesh rachele	February 21, 2023 06:04 by AtoHM	2	517
		[Gmsh] gmshToFoam unhandled element flowris	February 20, 2023 18:50 by wa$$im	4	5,190
		[snappyHexMesh] Why doesn't SnappyHexMesh retain patches from BlockMesh Nidalsb	February 20, 2023 09:48 by Nidalsb	10	3,027
		[Other] Some cellSets generated while some cellSet now size 0 Eubo	February 20, 2023 00:41 by Eubo	1	582
		[Technical] Flow between two cylinders - OpenFoam 10 - dynamic mesh npb	February 19, 2023 10:32 by npb	2	765
		[Gmsh] Does your file specify any 3D elements ? 2nicholas	February 18, 2023 23:37 by HumanistEngineer	2	1,123
		[Gmsh] Geometry with Obstacles HumanistEngineer	February 18, 2023 23:07 by HumanistEngineer	1	573
		[mesh manipulation] tetrahedral to polyhedral mesh conversion failed emjay	February 18, 2023 18:39 by vinguva	3	1,413
		[Salome] FaceZones in polyMesh BLK	February 17, 2023 06:48 by BLK	0	400

Read this first: How to ask a question on the forums

Page 13 of 149 « First < 3 11 12 13 14 15 23 63 113 > Last »

Display Options

Showing threads 481 to 520 of 5932

Sorted By Thread Title Last Post Time Thread Start Time Number of Replies Number of Views Thread Starter Thread Rating Sort Order Ascending Descending From The Last Day Last 2 Days Last Week Last 10 Days Last 2 Weeks Last Month Last 45 Days Last 2 Months Last 75 Days Last 100 Days Last Year Beginning Prefix (any prefix) (no prefix) [blockMesh] [CAD formats] [CGNS] [Commercial meshers] [foamyMesh] [Gmsh] [mesh manipulation] [Netgen] [Salome] [snappyHexMesh] [surface handling] [Technical] [Other]

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules