[spk]

Hi guys,

I created a 2D geometry using Gambit.
I'll use the OpenFoam dsmc solver.
I created the constant file with the dsmcProperties file.
Also, i created the system file with the
controlDict
decomposeParDict
dsmcInitializeDict
fvSchemes
fvSolution

when i type in terminal gambitToFoam orifice.neu
OpenFoam appears this message:

/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 2.0.1 |
| \\ / A nd | Web: www.OpenFOAM.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 2.0.1-cce6c678443c
Exec : gambitToFoam orifice.neu
Date : Oct 19 2011
Time : 11:59:32
Host : ubuntu
PID : 2346
Case : /home/spyros/OpenFOAM/spyros-2.0.1/run/tutorials/discreteMethods/dsmcFoam/orifice
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Disallowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time


Title: default_id10108
Written by Gambit version 2.4.6
number of points: 1581
number of cells: 1500
number of patches: 1
Reading nodal coordinates
Reading cells

Reading cell streams
Reading cell stream labels
Finished reading cell stream labels
Reading patches
patch 0: name: wall
Finished lexing
#0 Foam::error:rintStack(Foam::Ostream&) in "/opt/openfoam201/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#1 Foam::sigSegv::sigHandler(int) in "/opt/openfoam201/platforms/linux64GccDPOpt/lib/libOpenFOAM.so"
#2 in "/lib/x86_64-linux-gnu/libc.so.6"
#3
in "/opt/openfoam201/platforms/linux64GccDPOpt/bin/gambitToFoam"
#4 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
#5
in "/opt/openfoam201/platforms/linux64GccDPOpt/bin/gambitToFoam"
Segmentation fault

Where is the problem??
Please help!!!!
spk

[chegdan]

When I use GAMBIT for 2D meshes I always export the mesh in .msh format, check the box that it is a 2d mesh and export. If the case is set up, all you have to do is use fluentMeshToFoam and its imported if all is defined properly.